SPEC 81114

15kV CU 133% TRXLPE One-Third Neutral LLDPE

Single Conductor, 220 Mils Tree Retardant Cross Linked Polyethylene, 133% Insulation Level, One-third Concentric Neutral, Linear Low Density Polyethylene (LLDPE) Jacket. Silicone Free

...

Construction:

  1. Conductor:Moisture blocked class B compressed stranded soft drawn bare copper per ASTM B3 and ASTM B8 (Conductor moisture block optional and tinned copper per ASTM B33 optional)
  2. Conductor Shield:Conventional Semi-conducting cross-linked copolymer; Supersmooth conductor shield optional; A conductor tape is used for cable size larger than or equal to 1500 Kcmil
  3. Insulation:220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level
  4. Insulation Shield:Strippable semi-conducting cross-linked copolymer
  5. Concentric Neutral:Helically applied soft drawn bare copper one-third concentric neutral
  6. Overall Jacket:Linear Low Density Polyethylene (LLDPE) Jacket, black with red extruded stripes; PowerGlide® LLDPE jacket optional

Applications and Features:

Southwire's 15kV cables are suited for use in wet and dry areas, conduits, ducts, direct burial, sunlight, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation. 130°C for emergency overload, and 250°C for short circuit conditions. Jacket types available that can be installed in conduit without the aid of lubrication. Rated for 1000 lbs./FT maximum sidewall pressure.

Specifications:

  • ASTM B3 Soft or Annealed Copper Wire
  • ASTM B8 Concentric-Lay-Stranded Copper Conductors
  • ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
  • ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5 - 46kV
  • AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
  • Rural Utility Standard RUS 1728F-U1 or 1728.204 (Electric standards and specifications for materials and construction)
  • UL 1072 Listed as MV 90 When Specified
  • Optional CSA 68.5: -40ºC and MV 90ºC optional marking available upon request
  • Sample Print Legend:

    SOUTHWIRE HI-DRI(R) [CONDUCTOR SIZE] [AWG or KCMIL] CU 15000 VOLTS TRXLPE INSULATION 220 MILS -- (NESC) -- SOUTHWIRE {MMM} {YYYY} NON-CONDUCTING JACKET
    Table 1 – Weights and Measurements
    Stock NumberCond. SizeDiameter Over ConductorDiameter Over InsulationInsul. ThicknessDiameter Over Insulation ShieldConcentric NeutralNeutral DC Resistance 25°CJacket ThicknessApprox. ODApprox. WeightMin Bending RadiusMax Pull Tension
    AWG/KcmilinchinchmilinchNo. x AWGΩ/1000ftmilinchlb/1000ftinchlb
    TBA2 (Solid)0.2570.7352200.8255x140.526501.0536208.4530
    4300742 (7)0.2820.7532200.8436x140.438501.0716308.6530
    TBA1 (Solid)0.2890.7672200.8577x140.375501.0857208.7669
    TBA1 (19)0.3220.8002200.8907x140.375501.1187398.9669
    TBA1/0 (Solid)0.3240.8022200.8929x140.292501.1208349.0844
    6281601/0 (19)0.3610.8322200.9229x140.292501.1508319.2844
    6281612/0 (19)0.4050.8762200.96611x140.239501.1949649.61064
    619059^2/0 (19)0.4050.8762200.96611x140.239501.1949649.61064
    TBA3/0 (19)0.4560.9342201.02414x140.187501.252116810.01342
    6281654/0 (19)0.5120.9822201.07218x140.146501.300135010.41692
    TBA250 (37)0.5581.0442201.15420x140.131501.382158811.12000
    628167350 (37)0.6611.1412201.25118x120.092501.512205712.12800
    620756500 (37)0.7891.2692201.37926x120.063751.640275513.14000
    612883500 (37)0.7891.2692201.37917x100.061751.736287713.94000
    607756600 (61)0.8651.3562201.46620x100.052751.823334614.64800
    628171750 (61)0.9681.4582201.56825x100.041751.925403615.46000
    622842?750 (61)0.9681.4582201.56820x90.041751.950410215.66000
    6281751000 (61)1.1171.6072201.74726x90.031752.129523717.08000
    6281771000 (61)1.1171.6072201.74721x80.031752.158529417.38000
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    * Pulling tension based on pulling eye directly connected to conductor
    ^ No Red Stripes
    † PowerGlide: Low coefficient jacket can be installed in duct without the aid of lubrication.
    Table 2 – Electrical and Engineering Data
    Cond. SizeDC Resistance @ 25°CAC Resistance @ 90°CCapacitive Reactance @ 60HzInductive Reactance @ 60HzCharging CurrentDielectric LossZero Sequence ImpedancePositive Sequence ImpedanceShort Circuit Current @ 30 CycleAllowable Ampacity in Duct 90°CAllowable Ampacity Directly Buried 90°C
    AWG/KcmilΩ/1000ftΩ/1000ftMΩ*1000ftΩ/1000ftA/1000ftW/1000ftΩ/1000ftΩ/1000ftAmpAmpAmp
    2 (Solid)0.1620.2040.0610.0540.1390.40.257 + j0.7600.204 + j0.0551876160195
    2 (7)0.1620.2040.0580.0520.1490.40.257 + j0.7590.204 + j0.0532092160195
    1 (Solid)0.1280.1620.0570.0520.1490.40.216 + j0.7600.162 + j0.0532367180220
    1 (19)0.1280.1620.0540.0500.1590.40.216 + j0.7560.162 + j0.0512367180220
    1/0 (Solid)0.1020.1280.0530.0500.1600.40.182 + j0.7580.128 + j0.0512986200250
    1/0 (19)0.1020.1280.0490.0480.1730.40.182 + j0.7540.128 + j0.0493138200250
    2/0 (19)0.0810.1020.0460.0470.1860.50.156 + j0.7500.102 + j0.0473836230285
    2/0 (19)0.0810.1020.0460.0470.1860.50.156 + j0.7500.102 + j0.0473836230285
    3/0 (19)0.0640.0810.0430.0450.1990.50.135 + j0.7470.081 + j0.0454746260320
    4/0 (19)0.0510.0650.0390.0430.2190.60.119 + j0.7420.065 + j0.0446277300360
    250 (37)0.0430.0560.0370.0430.2320.60.110 + j0.7380.056 + j0.0437071325
    350 (37)0.0310.0410.0320.0410.2650.70.095 + j0.730.041 + j0.0419973390460
    500 (37)0.0220.0300.0280.0390.3040.80.084 + j0.7210.030 + j0.04014406455525
    500 (37)0.0220.0300.0280.0400.3040.80.084 + j0.7190.030 + j0.04014973455525
    600 (61)0.0180.0260.0260.0390.3290.90.080 + j0.7150.026 + j0.03917615
    750 (61)0.0140.0230.0240.0380.3600.90.077 + j0.7100.023 + j0.03822019545580
    750 (61)0.0140.0230.0240.0380.3600.90.077 + j0.7100.023 + j0.03822214545580
    1000 (61)0.0110.0190.0210.0370.4041.00.073 + j0.7030.019 + j0.03728878
    1000 (61)0.0110.0190.0210.0370.4041.00.073 + j0.7020.019 + j0.03729419
    *Ampacities for Direct Buried are based on ICEA P-117-734-2016 Single-Conductor Solid Dielectric 15-35kV. Single Circuit Flat Direct Buried Figure 3
    *Ampacities for Duct are based on ICEA P-117-734-2016 for Single-Conductor Solid Dielectric 15-35kV. Single Circuit Trefoil Conduit Figure 7.
    *Sequence Impedance values are based on Rho Earth Resistivity: 100 Ohm-Meter/1000ft, Spacing: one diameter spacing center-to-center.
    Table 3 – Weights and Measurements (Metric)
    Stock NumberCond. SizeDiameter Over ConductorDiameter Over InsulationInsul. ThicknessDiameter Over Insulation ShieldConcentric NeutralNeutral DC Resistance 25°CJacket ThicknessApprox. ODApprox. WeightMin Bending RadiusMax Pull Tension
    AWG/KcmilmmmmmmmmNo. x AWGΩ/kmmmmmkg/kmmmnewton
    TBA2 (Solid)6.5318.675.5920.965x141.731.2726.75923213.362359
    4300742 (7)7.1619.135.5921.416x141.441.2727.20938218.442359
    TBA1 (Solid)7.3419.485.5921.777x141.231.2727.561071220.982977
    TBA1 (19)8.1820.325.5922.617x141.231.2728.401100226.062977
    TBA1/0 (Solid)8.2320.375.5922.669x140.961.2728.451241228.603756
    6281601/0 (19)9.1721.135.5923.429x140.961.2729.211237233.683756
    6281612/0 (19)10.2922.255.5924.5411x140.781.2730.331435243.844735
    619059^2/0 (19)10.2922.255.5924.5411x140.781.2730.331435243.844735
    TBA3/0 (19)11.5823.725.5926.0114x140.611.2731.801738254.005972
    6281654/0 (19)13.0024.945.5927.2318x140.481.2733.022009264.167529
    TBA250 (37)14.1726.525.5929.3120x140.431.2735.102363281.948900
    628167350 (37)16.7928.985.5931.7818x120.301.2738.403061307.3412460
    620756500 (37)20.0432.235.5935.0326x120.211.9141.664100332.7417800
    612883500 (37)20.0432.235.5935.0317x100.201.9144.094281353.0617800
    607756600 (61)21.9734.445.5937.2420x100.171.9146.304979370.8421360
    628171750 (61)24.5937.035.5939.8325x100.131.9148.896006391.1626700
    622842?750 (61)24.5937.035.5939.8320x90.131.9149.536104396.2426700
    6281751000 (61)28.3740.825.5944.3726x90.101.9154.087794431.8035600
    6281771000 (61)28.3740.825.5944.3721x80.101.9154.817878439.4235600
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    * Pulling tension based on pulling eye directly connected to conductor
    ^ No Red Stripes
    † PowerGlide: Low coefficient jacket can be installed in duct without the aid of lubrication.
    Table 4 – Electrical and Engineering Data (Metric)
    Cond. SizeDC Resistance @ 25°CAC Resistance @ 90°CCapacitive Reactance @ 60HzInductive Reactance @ 60HzCharging CurrentDielectric LossZero Sequence Impedance*Positive Sequence Impedance*Short Circuit Current @ 30 CycleAllowable Ampacity in Duct 90°CAllowable Ampacity Directly Buried 90°C
    AWG/KcmilΩ/kmΩ/kmMΩ*kmΩ/kmA/kmW/kmΩ/1000ftΩ/1000ftAmpAmpAmp
    2 (Solid)0.53150.670.01860.17720.4561.31230.257 + j0.7600.204 + j0.0551876160195
    2 (7)0.53150.670.01770.17060.4891.31230.257 + j0.7590.204 + j0.0532092160195
    1 (Solid)0.41990.530.01740.17060.4891.31230.216 + j0.7600.162 + j0.0532367180220
    1 (19)0.41990.530.01650.16400.5221.31230.216 + j0.7560.162 + j0.0512367180220
    1/0 (Solid)0.33460.420.01620.16400.5251.31230.182 + j0.7580.128 + j0.0512986200250
    1/0 (19)0.33460.420.01490.15750.5681.31230.182 + j0.7540.128 + j0.0493138200250
    2/0 (19)0.26570.330.01400.15420.6101.64040.156 + j0.7500.102 + j0.0473836230285
    2/0 (19)0.26570.330.01400.15420.6101.64040.156 + j0.7500.102 + j0.0473836230285
    3/0 (19)0.21000.270.01310.14760.6531.64040.135 + j0.7470.081 + j0.0454746260320
    4/0 (19)0.16730.210.01190.14110.7191.96850.119 + j0.7420.065 + j0.0446277300360
    250 (37)0.14110.180.01130.14110.7611.96850.110 + j0.7380.056 + j0.0437071325
    350 (37)0.10170.130.00980.13450.8692.29660.095 + j0.730.041 + j0.0419973390460
    500 (37)0.07220.100.00850.12800.9972.62470.084 + j0.7210.030 + j0.04014406455525
    500 (37)0.07220.100.00850.13120.9972.62470.084 + j0.7190.030 + j0.04014973455525
    600 (61)0.05910.090.00790.12801.0792.95280.080 + j0.7150.026 + j0.03917615
    750 (61)0.04590.080.00730.12471.1812.95280.077 + j0.7100.023 + j0.03822019545580
    750 (61)0.04590.080.00730.12471.1812.95280.077 + j0.7100.023 + j0.03822214545580
    1000 (61)0.03610.060.00640.12141.3253.28080.073 + j0.7030.019 + j0.03728878
    1000 (61)0.03610.060.00640.12141.3253.28080.073 + j0.7020.019 + j0.03729419
    *Ampacities for Direct Buried are based on ICEA P-117-734-2016 Single-Conductor Solid Dielectric 15-35kV. Single Circuit Flat Direct Buried Figure 3
    *Ampacities for Duct are based on ICEA P-117-734-2016 for Single-Conductor Solid Dielectric 15-35kV. Single Circuit Trefoil Conduit Figure 7.
    *Sequence Impedance values are based on Rho Earth Resistivity: 100 Ohm-Meter/1000ft, Spacing: one diameter spacing center-to-center.

    Revision: 1.000.000

    Updated On: July 3, 2024, 10:19 p.m. UTC

    Concentric Neutral Calculator
    QR Code