SPEC 85030

Multi-Conductor CU 600 V Shielded PE/PVC Insulation PVC Jacket Control Cable Color Method 1 Table 1

Control Cable 600 Volt Copper Conductors, Polyethylene Polyvinyl Chloride (PE/PVC) Insulation Shielded Polyvinyl Chloride (PVC) Jacket, Control Cable Conductor Identification Method 1 Table 1. Silicone Free

...

Construction:

  1. Conductor:7 strands class B compressed bare copper per ASTM B3 and ASTM B8
  2. Insulation:Polyethylene (PE) and Polyvinyl Chloride (PVC)
  3. Filler:Polypropylene filler on cables with 5 or less conductors
  4. Binder:Polyester flat thread binder tape applied for cables with more than 5 conductors
  5. Shielding:5 mils tape shield
  6. Rip Cord:Rip cord for ease of jacket removal
  7. Overall Jacket:Polyvinyl Chloride (PVC) Jacket

Applications and Features:

Southwire’s 600 Volt control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 75°C for normal operation in wet and dry locations, 90°C for emergency overload, and 150°C for short circuit conditions.

Specifications:

  • ASTM B3 Soft or Annealed Copper Wire
  • ASTM B8 Concentric-Lay-Stranded Copper Conductors
  • CSA CSA marking is available upon request
  • ICEA S-58-679 Control Cable Conductor Identification Method 1 Table 1
  • ICEA S-73-532 Standard for Control, Thermocouple Extension and Instrumentation Cables
  • ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
  • Sample Print Legend:

    SOUTHWIRE XX AWG X/C PE/PVC CDRS 600V SHIELDED PVC JKT SUN. RES. DIRECT BURIAL {MM/DD/YYYY} {SEQUENTIAL FOOTAGE MARKS} SEQ FEET
    Table 1 – Physical and Electrical Data
    Stock NumberCond. SizeCond. NumberCond. StrandsDiameter Over Cond.Insul. ThicknessJacket ThicknessApprox. ODCopper WeightApprox. WeightDC Resistance @ 25°CAC Resistance @ 75°CInductive RectanceMin Bending RadiusAllowable Ampacity At 60°CAllowable Ampacity 75°CAllowable Ampacity 90°C
    AWGNo.strandsinchmilmilinchlb/1000ftlb/1000ftΩ/1000ftΩ/1000ftΩ/1000ftinchAmpAmpAmp
    18 AWG
    62210818370.04525450.32632666.6698.0350.0363.9--14
    606790181270.04525450.515901696.6698.0350.0366.2--7
    14 AWG
    60676714770.07030450.5141191982.6313.1700.0586.2101417
    618969141270.07030600.6901943312.6313.1700.0588.371012
    12 AWG
    61872112270.08830450.421641141.6622.0020.0545.1202530
    61872212370.08830450.445861461.6622.0020.0545.3202530
    61872312470.08830450.4841091821.6622.0020.0545.8162024
    61872412770.08830600.6041762871.6622.0020.0547.2141721
    617106121270.08830800.8102904681.6622.0020.0549.7101215
    10 AWG
    60676810270.11330450.464911551.0401.2530.0503.2303540
    61916210370.11330450.4911251961.0401.2530.0503.4303540
    61710510470.11330600.5581602461.0401.2530.0503.9242832
    62088110470.11330600.5621682601.0401.2530.0503.9242832
    60676910570.11330600.6151963021.0401.2530.0504.3242832
    61896810770.11330600.6592643871.0401.2530.0502.6212428
    62229610770.11330600.6632663911.0401.2530.0504.6212428
    60677010970.11330600.7783354901.0401.2530.0505.4212428
    606771101270.11330800.9114386631.0401.2530.05010.9151720
    8 AWG
    6067738270.14145600.6741422720.6530.7860.0524.7405055
    6203018370.14145600.7191953590.6530.7860.0525.0405055
    6073978570.14145800.9033085430.6530.7860.0526.3324044
    6 AWG
    6262046370.17745600.7322864210.4110.4950.0515.1556575
    6067746270.17745600.7902113650.4110.4950.0515.5556575
    6263046470.17745800.9633816550.4110.4950.0516.7445260
    6008996570.17745801.0504717780.4110.4950.0517.4445260
    2 AWG
    6261252370.28245800.9886768980.1620.1950.0456.995115130
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    * Ampacities based upon 2023 NEC Table 310.16 and do not take into account the overcurrent protection limitations in NEC 240.4(D) of 15 Amps for 14 AWG CU, 20 Amps for 12 AWG CU, and 30 Amps for 10 AWG CU (independent of the conductor temperature rating and stranding if size is present in table). Also, see NEC sections 310.15 and 110.14(C) for additional requirements. Ampacities have been adjusted for stock numbers containing more than Three Current-Carrying Conductors.

    Revision: 1.000.001

    Updated On: Dec. 20, 2023, 9:43 p.m. UTC