SPEC 85025

Multi-Conductor CU 600 V FR-XLPE LCT Shielded Thermoplastic CPE-TP Jacket Control Cable Color Method 1 Table 2

Control Cable 600 Volt Copper Conductors, Flame Retardant Cross Linked Polyethylene (FR-XLPE) Insulation Shielded Thermoplastic Chlorinated Polyethylene (CPE-TP) Jacket, Control Cable Conductor Identification Method 1 Table 2. Silicone Free

...

Construction:

  1. Conductor:7 strands class B compressed bare copper per ASTM B3 and ASTM B8
  2. Insulation:Flame Retardant Cross Linked Polyethylene (FR-XLPE), 30 Mils thick for all cable sizes
  3. Filler:Polypropylene filler on cables with 5 or less conductors
  4. Binder:Polyester flat thread binder tape applied for cables with more than 5 conductors
  5. Shield:5 mils copper Longitudinally-Applied Corrugated Tape (LCT) shield
  6. Rip Cord:Rip cord for ease of jacket removal
  7. Overall Jacket:Thermoplastic Chlorinated Polyethylene (CPE-TP)

Applications and Features:

Southwire’s 600 Volt control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. UL rated constructions can be used in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. UL rated constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10.

Specifications:

  • ASTM B3 Soft or Annealed Copper Wire
  • ASTM B8 Concentric-Lay-Stranded Copper Conductors
  • UL 44 Thermoset-Insulated Wires and Cables
  • UL 1277 Electrical Power and Control Tray Cables
  • UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test
  • ICEA S-58-679 Control Cable Conductor Identification Method 1 Table 2
  • ICEA S-73-532 Standard for Control, Thermocouple Extension and Instrumentation Cables
  • ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
  • IEEE 1202 FT4 Vertical Tray Flame Test (70,000 Btu/hr) and ICEA T-29-520 - (210,000 Btu/hr)
  • VW-1 (Vertical-Wire) Flame Test
  • Sample Print Legend:

    UL Listed
    SOUTHWIRE {UL} E75755 XX AWG CU X/C FR-XLPE E2 CDRS SHIELDED TYPE TC CPE JACKET 600V YEAR {SEQUENTIAL FOOTAGE MARKS} SEQ FEET

    Non UL Listed
    SOUTHWIRE XX AWG CU X/C FR-XLPE E2 CDRS SHIELDED CPE JACKET 600V SUN RES DIR BUR YEAR {SEQUENTIAL FOOTAGE MARKS} SEQ FEET

    Table 1 – Physical and Electrical Data
    Stock NumberCond. SizeCond. NumberCond. StrandsDiameter Over Cond.Insul. ThicknessJacket ThicknessApprox. ODCopper WeightApprox. WeightDC Resistance @ 25°CAC Resistance @ 75°CMin Bending RadiusAllowable Ampacity 90°C
    AWGNo.strandsinchmilmilinchlb/1000ftlb/1000ftΩ/1000ftΩ/1000ftinchAmp
    18 AWG
    606981182070.03625600.733842926.6698.0352.98
    14 AWG
    TBA14270.07030450.452481072.6313.1705.425
    TBA14370.07030450.472621282.6313.1705.725
    TBA14470.07030450.506781382.6313.1706.120
    626270^14470.07030450.514841742.6313.1706.220
    TBA14570.07030600.573931772.6313.1706.920
    TBA14670.07030600.6121102042.6313.1707.320
    TBA14770.07030600.6121232222.6313.1707.317
    TBA14870.07030600.6521392482.6313.1707.817
    TBA14970.07030600.6911562742.6313.1708.317
    TBA141070.07030600.7421723012.6313.1708.912
    TBA141270.07030600.7622003412.6313.1709.112
    TBA141570.07030800.8742444422.6313.17010.512
    TBA141970.07030800.9122995232.6313.17010.912
    TBA142070.07030800.9523155502.6313.17011.412
    TBA142570.07030801.0423866602.6313.17012.511
    TBA143070.07030801.0954557622.6313.17013.111
    TBA143770.07030801.1725529052.6313.17014.110
    12 AWG
    66186412270.08830450.488741431.6622.0025.930
    TBA12370.08830450.511891631.6622.0026.130
    622950^12470.08830600.5751202251.6622.0026.924
    TBA12570.08830600.6211362301.6622.0027.524
    622948^12770.08830600.6611873241.6622.0027.921
    TBA12670.08830600.6661602651.6622.0028.024
    TBA12870.08830600.7112043271.6622.0028.521
    TBA12970.08830600.7562293631.6622.0029.121
    TBA121070.08830600.8142544001.6622.0029.815
    622953^121270.08830800.8722995291.6622.00210.515
    TBA121570.08830800.9593655901.6622.00211.515
    TBA121970.08830801.0024507051.6622.00212.015
    TBA122070.08830801.0474747421.6622.00212.615
    TBA122570.08830801.1505858981.6622.00213.813
    TBA123070.08830801.21069210431.6622.00214.513
    TBA123770.08830801.29884112471.6622.00215.612
    10 AWG
    622946^10270.11330600.5661031981.0401.2536.840
    TBA10370.11330600.5951292331.0401.2537.140
    622943^10470.11330600.6321732931.0401.2537.632
    606859^10470.11330600.6521623001.0401.2537.832
    66221610570.11330600.6852063441.0401.2538.232
    TBA10670.11330600.7412393611.0401.2538.932
    62220910770.11330600.7512764461.0401.2539.028
    TBA10870.11330600.7943074501.0401.2539.528
    TBA10970.11330800.8863455351.0401.25310.628
    TBA101070.11330800.9543835911.0401.25311.420
    662217101270.11330800.9714557221.0401.25311.720
    TBA101570.11330801.0765558171.0401.25312.920
    TBA101970.11330801.1276899871.0401.25313.520
    TBA102070.11330801.18072510391.0401.25314.220
    TBA102570.11330801.30089812661.0401.25315.618
    TBA103070.11330801.370106614801.0401.25316.418
    TBA103770.11330801.473130017791.0401.25317.716
    8 AWG
    TBA8270.14145600.6841422740.6530.7868.255
    62298481270.14145801.22570111110.6530.78614.727
    6 AWG
    622994^6270.17745600.7562133650.4110.4959.175
    6618636470.17745800.9113776270.4110.49510.960
    4 AWG
    622996^4270.22545800.8943155240.2580.31010.795
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    ^ UL listed part number
    * Ampacities based upon 2023 NEC Table 310.16 and do not take into account the overcurrent protection limitations in NEC 240.4(D) of 15 Amps for 14 AWG CU, 20 Amps for 12 AWG CU, and 30 Amps for 10 AWG CU (independent of the conductor temperature rating and stranding if size is present in table). Also, see NEC sections 310.15 and 110.14(C) for additional requirements. Ampacities have been adjusted for stock numbers containing more than Three Current-Carrying Conductors.

    Revision: 1.000.002

    Updated On: July 3, 2024, 10:14 p.m. UTC