SPEC 26131

HVTECK AL 1/C 90TRXLPE TS PVC AIA PVC 5kV 100% CSA

Single Conductor, 90 Mils Tree Retardant Cross Linked Polyethylene, 100% Insulation Level, Tape Shield, Polyvinyl Chloride (PVC) Inner Jacket, Aluminum Interlocked Armour (AIA), Polyvinyl Chloride (PVC) Jacket

...

Construction:

  1. Conductor:Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836
  2. Conductor Shield:Semi-conducting cross-linked copolymer; A conductor separator is used for cable size larger than or equal to 500 Kcmil
  3. Insulation:90 Mils Tree Retardant Cross Linked Polyethylene 100% insulation level
  4. Insulation Shield:Strippable semi-conducting cross-linked copolymer
  5. Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
  6. Inner Jacket:PVC inner jacket
  7. Armour:Aluminum Interlocked Armour (AIA)
  8. Overall Jacket:Orange Polyvinyl Chloride (PVC) Jacket

Applications and Features:

Southwire's 5kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs /FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.

Specifications:

  • ASTM B801 Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy
  • ASTM B836 Compact Rounded Stranded Aluminum Conductors
  • CSA C22.2 No. 174 Cables in Hazardous Locations
  • CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
  • CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
  • CSA C68.3 Shielded & Concentric Neutral Power Cable - 5 to 46 kV
  • CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
  • CSA HL - for Hazardous Locations rating
  • CSA SUN RES - for Sunlight Resistant rating
  • ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
  • ICEA T-29-520 Flame Test (210,000 BTU/Hr)
  • IEEE 383 Flame Test (70,000 btu)
  • IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)
  • FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)
  • AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
  • Sample Print Legend:

    (CSA) SOUTHWIRE (NESC) #P# 1/C [#AWG or #kcmil] CPT AL 90 TRXLPE AIA 5kV 100% INS LEVEL 25% TS SUN RES 105°C FT4 HL (-40°C) LTGG RoHS YEAR [SEQUENTIAL METER MARKS]
    Table 1 – Weights and Measurements
    Cond. SizeStrandDiameter Over ConductorDiameter Over InsulationInsul. ThicknessDiameter Over Insulation ShieldInner Jacket ThicknessDia. Over ArmourOverall Jacket ThicknessApprox. ODApprox. Weight
    AWG/KcmilNo.inchinchmilinchmilinchmilinchlb/1000ft
    270.2680.486900.546650.918501.018458
    1190.2980.516900.576650.948501.048493
    1/0190.3360.554900.614650.986501.086537
    2/0190.3760.594900.654651.026501.126589
    3/0190.4220.640900.700801.102501.202684
    4/0190.4740.692900.752801.154501.254760
    250370.5200.746900.806801.208501.308835
    350370.6150.841900.901801.413501.5131004
    500370.7350.961901.021801.533601.6531259
    750610.9081.144901.204801.740601.8601663
    1000611.0601.296901.356801.892602.0122101
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    * Strand count meets minimum number per ASTM
    Table 2 – Electrical and Engineering Data
    Cond. SizeMin Bending RadiusMax Pull TensionDC Resistance @ 25°CAC Resistance @ 90°CCapacitive Reactance @ 60HzInductive Reactance @ 60HzZero Sequence ImpedancePositive Sequence ImpedancePhase Short Circuit Current @ 6 CyclesAllowable Ampacity In Air 90°CAllowable Ampacity Directly Buried 90°C
    AWG/KcmilinchlbΩ/1000ftΩ/1000ftMΩ*1000ftΩ/1000ftΩ/1000ftΩ/1000ftAmpAmpAmp
    212.23980.2670.3360.0350.0520.683 + j0.5410.337 + j0.0521722169176
    112.65020.2110.2660.0320.0510.617 + j0.5220.267 + j0.0491815194198
    1/013.06330.1680.2110.0300.0490.567 + j0.5010.212 + j0.0471933222223
    2/013.57980.1330.1670.0270.0470.526 + j0.4800.168 + j0.0452057255250
    3/014.410060.1050.1330.0250.0460.495 + j0.4560.134 + j0.0442199290278
    4/015.012690.0840.1050.0220.0440.468 + j0.4310.106 + j0.0422360329309
    25015.715000.0710.0900.0210.0430.454 + j0.4080.091 + j0.0412528370347
    35018.221000.0500.0650.0180.0420.425 + j0.3690.066 + j0.0412822446402
    50019.830000.0350.0460.0160.0400.400 + j0.3260.047 + j0.0393194533451
    75022.345000.0240.0330.0130.0380.374 + j0.2730.034 + j0.0373761631500
    100024.160000.0180.0260.0110.0360.353 + j0.2370.027 + j0.0354232707539
    * Inductive impedance is based on non-ferrous conduit with one diameter spacing.
    Table 3 – Weights and Measurements (Metric)
    Cond. SizeStrandDiameter Over ConductorDiameter Over InsulationInsul. ThicknessDiameter Over Insulation ShieldInner Jacket ThicknessDia. Over ArmourOverall Jacket ThicknessApprox. ODApprox. Weight
    AWG/KcmilNo.mmmmmmmmmmmmmmmmkg/km
    276.8112.342.2913.871.6523.321.2725.86682
    1197.5713.112.2914.631.6524.081.2726.62734
    1/0198.5314.072.2915.601.6525.041.2727.58799
    2/0199.5515.092.2916.611.6526.061.2728.60877
    3/01910.7216.262.2917.782.0327.991.2730.531018
    4/01912.0417.582.2919.102.0329.311.2731.851131
    2503713.2118.952.2920.472.0330.681.2733.221243
    3503715.6221.362.2922.892.0335.891.2738.431494
    5003718.6724.412.2925.932.0338.941.5241.991874
    7506123.0629.062.2930.582.0344.201.5247.242475
    10006126.9232.922.2934.442.0348.061.5251.103127
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    * Strand count meets minimum number per ASTM
    Table 4 – Electrical and Engineering Data (Metric)
    Cond. SizeMin Bending RadiusMax Pull TensionDC Resistance @ 25°CAC Resistance @ 90°CCapacitive Reactance @ 60HzInductive Reactance @ 60HzZero Sequence ImpedancePositive Sequence ImpedancePhase Short Circuit Current @ 6 CyclesAllowable Ampacity In Air 90°CAllowable Ampacity Directly Buried 90°C
    AWG/KcmilmmnewtonΩ/kmΩ/kmMΩ*kmΩ/kmΩ/1000ftΩ/1000ftAmpAmpAmp
    2309.8817710.87601.100.01070.17060.683 + j0.5410.337 + j0.0521722169176
    1320.0422340.69230.870.00980.16730.617 + j0.5220.267 + j0.0491815194198
    1/0330.2028170.55120.690.00910.16080.567 + j0.5010.212 + j0.0471933222223
    2/0342.9035510.43640.550.00820.15420.526 + j0.4800.168 + j0.0452057255250
    3/0365.7644770.34450.440.00760.15090.495 + j0.4560.134 + j0.0442199290278
    4/0381.0056470.27560.340.00670.14440.468 + j0.4310.106 + j0.0422360329309
    250398.7866750.23290.300.00640.14110.454 + j0.4080.091 + j0.0412528370347
    350462.2893450.16400.210.00550.13780.425 + j0.3690.066 + j0.0412822446402
    500502.92133500.11480.150.00490.13120.400 + j0.3260.047 + j0.0393194533451
    750566.42200250.07870.110.00400.12470.374 + j0.2730.034 + j0.0373761631500
    1000612.14267000.05910.090.00340.11810.353 + j0.2370.027 + j0.0354232707539
    * Inductive impedance is based on non-ferrous conduit with one diameter spacing.

    Revision: 1.000.000

    Updated On: Dec. 11, 2023, 9:29 p.m. UTC