FMC-PCS Duo™

Fixture Whip Assembly, 14 AWG through 10 AWG THHN/THWN Insulated Singles. Green Insulated Ground. UL Listed. 600 Volts. Rated VW-1. Steel Interlocked Armor. Includes UL Listed Fittings and Prepared Cable Ends.

Download PDF

Construction:

Conductor:Class B compressed stranded copper per ASTM B3 and ASTM B8
Insulation:All phases are insulated with Polyvinyl Chloride with Nylon Sheath Type THHN/THWN
Ground: Green insulated copper ground
Binder:Binder tape bearing the print legend is wrapped around the cable assembly
Signal:16 AWG Copper TFN Insulated Singles Pink, Purple. Overall black jacket over the signal cables
Connector:Zinc die-cast snap on connector or locknut
Armor:Steel Interlocked Armor

Applications and Features:

Southwire FMC-PCS Duo™ Modular Cable Assemblies are suitable for use as follows:

Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.

Fished or embedded in plaster.

Concealed or exposed installations.

Environmental air-handling spaces per NEC 300.22 (C).

Places of Assembly per NEC 518.4 and theaters per NEC 520.5.

Installation in cable tray and approved raceways.

Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2)

Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.

SouthwireFMC-PCS Duo™ Modular Cable Assemblies - meets or exceeds the following requirements:

UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )

Federal Specification A-A59544 (formerly J-C-30B)

NFPA 70 (National Electrical Code), Article 330

Listed for use in UL 1, 2 and 3 Hour Through Penetration Firestop Systems

REACH/RoHS-2 (Chemical Limit) Compliant

FMC-PCS Duo™ Modular Cable Assemblies Features:

Reduces installation costs up to 50% over pipe and wire.

Pre-cut lengths eliminate on-site preparation and save installation and clean up time.

Pre-stripped conductors increase jobsite safety

UL Listed snap-in fittings applied to each end

UL Classified 1, 2, and 3 hour Through Penetration Firestop Systems: W-J-3037, W-L-3110, W-L-3113, W-L-3117, W-L-3120, W-L-3121, W-L-3160, C-AJ-3115, C-AJ-3140, C-AJ-3142, C-AJ-3145, C-AJ-3173, C-AJ-3202, C-AJ-4065, C-AJ-4066, F-C-3038.

Cable reverse wound on reel for ease of pulling and installation. When pulling from coils, pull from inside to ensure ease of installation.

Anti-short bushings are not required for use with MC cable per the NEC and UL

Specifications:

ASTM B8 Concentric-Lay-Stranded Copper Conductors

UL 83 Thermoplastic Insulated Wires and Cables

UL 1569 Metal-Clad Cables

UL 1479 Standard for Safety Fire Tests of Penetration Firestops

UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test

Buy American: Compliant with Buy American Requirements, found in 49 U.S.C. § 5323(j); specify “Made in the USA Only!” when ordering to ensure your project receives American made products.

Sample Print Legend:

XX GALFLEX(R) RWS FLEX CONDUIT (XX") WHIP X'

Whip Assemblies

Stock Code	Size AWG	Trade Size	Cond. Num	Solid/Stranded	Color	Length ft	Connector Type
643892	14	1/2"	3	Solid	BK, WE, GN	6	Lock Nut
668262	14	1/2"	3	Solid	BN, GY, GN	6	Lock Nut
664821	14	1/2"	4	Solid	BK, WE, RD, GN	6	Lock Nut
672381	12	1/2"	3	Solid	BK, WE, GN	6	Lock Nut
644068	14	1/2"	3	Stranded	BK, WE, GN	6	Lock Nut
643717	12	1/2"	3	Stranded	BK, WE, GN	6	Lock Nut
679610	12	1/2"	3	Solid	BK, WE, GN	6	Snap-in
679610	12	1/2"	3	Solid	BK, WE, GN	10	Snap-in
672059	12	1/2"	3	Solid	BK, WE, GN	6	Snap-in
643719	12	1/2"	3	Stranded	BK, WE, GN	6	Snap In

Revision: 1.000.042

Updated On: June 17, 2025, 4:27 p.m. UTC