SPEC 60422

EZ-IN™ Mini-Split Shielded Cable

Copper Insulated Singles. Green Insulated Copper Grounding Conductor. UL Listed. 600 Volts. Lightweight Aluminum Interlocked Armor. PVC Jacketed, Sunlight Resistant.

...

Construction:

  1. Conductor: Stranded class B compressed copper per ASTM B3 and ASTM B8
  2. Insulation:Polyvinyl Chloride (PVC) with Nylon Sheath
  3. Shield:Aluminum foil with 18 AWG 19-strand tinned copper drain wire
  4. Armor:Aluminum Interlocked Armor
  5. Jacket:Polyvinyl Chloride (PVC) sunlight resistant

Applications and Features:

Southwire EZ-IN™ Mini-Split Jacketed Type MC Cable is suitable for use as follows:
  • Where exposed to cinder fills, strong chlorides, caustic alkalis, or vapors of chlorine or of hydrochloric acids.
  • Fished or embedded in plaster.
  • Installed without the use of conduit.
  • Concealed or exposed installations.
  • Suitable for Wet Location per NEC 330.10(11)
  • Installation in cable tray and approved raceways, or as aerial cable on a messenger.
  • Type THHN/THWN/TFN rated 90ºC Dry/ 75ºC Wet
  • Anti-Short bushing not required

  • Southwire EZ-IN™ Mini-Split Cable - meets or exceeds the following requirements:
  • UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
  • Federal Specification A-A59544 (formerly J-C-30B)
  • NFPA 70 (National Electrical Code), Article 330
  • Specifications:

  • ASTM B3 Soft or Annealed Copper Wire
  • ASTM B8 Concentric-Lay-Stranded Copper Conductors
  • ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
  • UL 83 Thermoplastic Insulated Wires and Cables
  • UL 1569 Metal-Clad Cables
  • Buy American: Compliant with Buy American Requirements, found in 49 U.S.C. § 5323(j); specify “Made in the USA Only!” when ordering to ensure your project receives American made products.
  • Sample Print Legend:

    SOUTHWIRE EZ-IN SHIELDED {UL} 4/C 14 AWG CU THHN OR THWN CDRS 600 VOLTS TYPE MC FOR CT USE SUN. RES. 90°C
    Table 1 – Weights and Measurements
    Stock NumberCond. SizeConductor NumberDiameter Over ConductorConductor StrandingInsulation ThicknessDiameter Over ArmorJacket ThicknessApprox. ODCopper WeightOverall Weight
    AWG/Kcmilinchmilsinchmilinchlbs/1000ftlbs/1000ft
    14 AWG | 7 Strands
    5935121440.0707200.484500.59057175
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    Table 2 – Electrical and Engineering Data
    Cond. SizeConductor NumberMin. Bend RadiusDC Resistance at 25°CAC Resistance at 75°CAllowable Ampacity Raceway 75°CAllowable Ampacity Raceway 90°C
    AWG/KcmilInchesΩ/1000ftΩ/1000ftAmpAmp
    14 AWG | 7 Strands
    1444.12.6313.2642025
    * Ampacities based upon 2023 NEC Table 310.16 and do not take into account the overcurrent protection limitations in NEC 240.4(D) of 15 Amps for 14 AWG CU, 20 Amps for 12 AWG CU, and 30 Amps for 10 AWG CU (independent of the conductor temperature rating and stranding if size is present in table). Also, see NEC sections 310.15 and 110.14(C) for additional requirements.
    * Ampacities have been adjusted for more than Three Current-Carrying Conductors.

    Colors

    Stock NumberSize AWGConductor NumberBlackRedBlueBrownOrangeYellowRed/BlackWhiteGreen
    BlackRedBlueBrownOrangeYellowRed/BlackWhiteGreen
    593512144XXXX

    Revision: 1.000.005

    Updated On: July 3, 2024, 10:13 p.m. UTC