Products > Industrial > Power Generation & Renewable (Combined Cycle & BESS) > SPEC44103
...United States
SPEC 44103

4/C CU 2000V EPDM/CPE Type W Industrial Grade Cable 90°C. MSHA Approved

Flexible Copper conductors, Ethylene Propylene Diene Monomer (EPDM) insulation, Single Layer Chlorinated Polyethylene (CPE) Jacket

...
Download PDF Download Excel Table
CableTech.........

Construction:

  1. Conductor:Bare, soft drawn, annealed, flexible, rope-lay stranded copper per ASTM B3/B172
  2. Separator Tape:Non-conducting tape applied between the conductor and insulation to facilitate stripping
  3. Insulation:Ethylene Propylene Diene Monomer (EPDM). Color coded black, white, red, green
  4. Fillers:Jute fillers applied as needed to round the cable core
  5. Reinforcement Binder:Reinforcing binder with twine applied over the core
  6. Jacket:Black, flame resistant, thermosetting Chlorinated Polyethylene (CPE)

Applications and Features:

Southwire Type W cable is a heavy-duty industrial cable for use in flexible, portable, and extra-hard usage applications per Article NEC 400. Suitable for continuous submersion in water – ideal for submersible pumps. Also suitable for use in light to medium-duty mining applications. Sunlight and oil resistant. Highly flexible and easy to work with in cold conditions. Not for use as perminant building wiring. Meets FT-5 Flame Test.

Specifications:

  • ASTM B3 Soft or Annealed Copper Wire
  • ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
  • UL 1650 Standard for Portable Power Cable
  • CSA C22.2 No. 96 Portable Power Cables
  • MSHA Approved
  • RoHS-2 (European Directive 2011/65/EU)

    • Sample Print Legend:

    SOUTHWIRE(R) ROYAL(R) XXX AWG (XX.Xmm2) 4/C TYPE W PORTABLE POWER CABLE E172226 (UL) 2000V 90C DRY 90C WET SUN RES -- 156205 CSA TYPE W 2000V -40C FT1 FT5 P-07-KA100010-MSHA
    Table 1 – Weights and Measurements
    Stock NumberCond. SizeCond. NumberCond. StrandsDiameter Over ConductorInsul. ThicknessJacket ThicknessApprox. ODApprox. WeightJacket Color
    AWG/KcmilNo.No.inchmilmilinchlb/1000ft
    55815284710.145601550.998593BK
    597803841330.145601551.036607BK
    55815464650.186601551.085774BK
    TBA444270.235601451.152632BK
    558156441120.235601651.2271056BK
    558157241680.291601801.4531707BK
    570102142240.3801551.6171973BK
    5581581/042590.379801781.7182230BK
    5581592/043240.4802121.8722765BK
    5600683/044180.48802101.9863350BK
    5600694/045320.53802242.1743944BK
    45621625046270.605952962.5625132BK
    57025035048930.67953752.8777000BK
    458465500412210.858953753.3319240BK
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.
    Table 2 – Electrical and Engineering Data
    Cond. SizeDC Resistance @ 25°CAC Resistance @ 90°CInductive ReactanceMax Pull TensionMin Bending RadiusAllowable Ampacity In Air 60°CAllowable Ampacity In Air 75°CAllowable Ampacity In Air 90°C
    AWG/KcmilΩ/1000ftΩ/1000ftΩ/1000ftlbinchAmpAmpAmp
    80.6540.8120.0525284384652
    80.6540.8120.0525285.2384652
    60.4190.520.0518395.4506270
    40.2630.3260.04813355.8678191
    40.2630.3260.04813356.1678191
    20.1660.2060.04521237.390106122
    10.1320.1640.04626788.1105125142
    1/00.1050.130.04433798.6121145164
    2/00.0840.1040.04342599.4139166190
    3/00.0660.0820.04253699.9161193219
    4/00.0530.0660.041677113186222253
    2500.0450.0560.041800015.4207248282
    3500.0320.0410.041120017.3254305346
    5000.0220.0290.0391600020314376429
    * Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.

    Revision: 1.000.003

    Updated On: Dec. 31, 2024, 11:07 p.m. UTC