SPEC 87004

EPEC 11 (SDR 11) With 1250 lb Mule Tape

...

Construction:

• High-Density Polyethylene (HDPE)
• 1250 lb Mule Tape

Applications and Features:

Designed to house and protect wire and cable products in various underground applications for commercial constructions, EV infrastructure expansions, Utility grid-hardening efforts, airports, mass transit, renewables, petrochemical, agriculture, and data centers. May be installed directly buried or encased in concrete. For above ground applications, HDPE conduit must be encased in a minimum of 2 inches of concrete.

Specifications:

  • ASTM D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
  • ASTM F2160 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
  • CSA CSA marking is available upon request
  • Buy American: Compliant with Buy American Requirements, found in 49 U.S.C. § 5323(j); specify “Made in the USA Only!” when ordering to ensure your project receives American made products.
  • NEMA TC-7 Smooth-Wall Coilable Electrical Polyethylene Conduit
  • Sample Print Legend:

    {SQFTG} FEET (LOGO) SOUTHWIRE CONDUIT HDPE X" EPEC-11 NEMA TC 7 / SDR11 ASTM F2160 {MMM/DD/YYYY} {MACH/SHFT/OP}
    Table 1 – Physical and Electrical Data
    Stock NumberDuct Nominal SizeDuct Nominal Outside Dia.Duct Min. Wall ThicknessDuct Nominal Inside Dia.Duct Min. Bending RadiusDuct Max. Pull TensionDuct ColorApprox. Cable and Duct Weight
    inchinchinchinchinchlblb/1000ft
    TBA0.751.0500.0780.84012605Optional111
    6330911.001.3150.0971.05514960BK/3-RD Stripes169
    TBA1.251.6600.1231.338181520Optional266
    TBA1.501.9000.1411.533211995Optional346
    6343602.002.3750.1761.917263125BK534
    6330752.002.3750.1761.917263125BK/3-RD Stripes534
    TBA2.002.3750.1761.917263125Optional534
    TBA2.502.8750.2132.322324550Optional784
    6330793.003.5000.2592.826396760BK/3-RD Stripes1159
    6330824.004.5000.4093.6335011170BK/3-RD Stripes2308
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item

    Cell Classification for HDPE Conduit

    PropertyTest MethodValue
    DensityD48830.953 g/cc
    Melt IndexD12380.25 g/10 min
    Flexural ModulusD790168,000 psi
    Tensile StrengthD6383900 yield @ 2 in/min
    SP-NCLS ESCRF2136>1000 hrs
    Hydrostatic Design BasisD2837N/A

  • (PE436580C-BK), (PE436580E-Colors)
  • Revision: 1.000.013

    Updated On: April 5, 2024, 3:29 p.m. UTC

    CIC Labor Saving Calculator
    QR Code