Name: 35kV CU 100% TRXLPE One-Third Neutral LLDPE
Brand: Southwire
Rating: 5 (1 reviews)

Products > Utility Products > MV Primary > SPEC81244

SPEC 81244

35kV CU 100% TRXLPE One-Third Neutral LLDPE

Single Conductor, 345 Mils Tree Retardant Cross Linked Polyethylene, 100% Insulation Level, One-third Concentric Neutral, Linear Low Density Polyethylene (LLDPE) Jacket. Silicone Free

Download PDF Download Excel Table

Construction:

Conductor:Moisture blocked class B compressed stranded soft drawn bare copper per ASTM B3 and ASTM B8 (Conductor moisture block optional and tinned copper per ASTM B33 optional)
Conductor Shield:Conventional Semi-conducting cross-linked copolymer; Supersmooth conductor shield optional; A conductor tape is used for cable size larger than or equal to 1500 Kcmil
Insulation:345 Mils Tree Retardant Cross Linked Polyethylene 100% insulation level
Insulation Shield:Strippable semi-conducting cross-linked copolymer
Concentric Neutral:Helically applied soft drawn bare copper one-third concentric neutral
Overall Jacket:Linear Low Density Polyethylene (LLDPE) Jacket, black with red extruded stripes; PowerGlide® LLDPE jacket optional

Applications and Features:

Southwire's 35kV cables are suited for use in wet and dry areas, conduits, ducts, direct burial, sunlight, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation. 130°C for emergency overload, and 250°C for short circuit conditions. Jacket types available that can be installed in conduit without the aid of lubrication. Rated for 1000 lbs./FT maximum sidewall pressure.

Specifications:

ASTM B3 Soft or Annealed Copper Wire

ASTM B8 Concentric-Lay-Stranded Copper Conductors

ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire

ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5 - 46kV

AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)

Rural Utility Standard RUS 1728F-U1 or 1728.204 (Electric standards and specifications for materials and construction)

UL 1072 Listed as MV 90 When Specified

Optional CSA 68.5: -40ºC and MV 90ºC optional marking available upon request

Sample Print Legend:

SOUTHWIRE HI-DRI(R) [CONDUCTOR SIZE] [AWG or KCMIL] CU 35000 VOLTS TRXLPE INSULATION 345 MILS -- (NESC) -- SOUTHWIRE {MMM} {YYYY} NON-CONDUCTING JACKET

Table 1 – Weights and Measurements

Stock Number	Cond. Size	Diameter Over Conductor	Diameter Over Insulation	Insul. Thickness	Diameter Over Insulation Shield	Concentric Neutral	Neutral DC Resistance 25°C	Jacket Thickness	Approx. OD	Approx. Weight	Min Bending Radius	Max Pull Tension
	AWG/Kcmil	inch	inch	mil	inch	No. x AWG	Ω/1000ft	mil	inch	lb/1000ft	inch	lb
TBA	1/0 (Solid)	0.324	1.052	345	1.162	9x14	0.292	50	1.390	1087	11.1	844
628241	1/0 (19)	0.361	1.082	345	1.192	9x14	0.292	50	1.420	1056	11.4	844
628244	2/0 (19)	0.405	1.126	345	1.236	11x14	0.239	50	1.464	1197	11.7	1064
TBA	3/0 (19)	0.456	1.184	345	1.294	14x14	0.187	50	1.522	1451	12.2	1342
628247	4/0 (19)	0.512	1.232	345	1.342	18x14	0.146	50	1.570	1601	12.6	1692
TBA	250 (37)	0.558	1.294	345	1.404	21x14	0.125	75	1.682	1969	13.5	2000
628287	350 (37)	0.661	1.391	345	1.501	18x12	0.092	75	1.816	2380	14.5	2800
TBA	500 (37)	0.789	1.525	345	1.665	26x12	0.063	75	1.977	3242	15.8	4000
628294	750 (61)	0.968	1.708	345	1.848	25x10	0.041	75	2.205	4413	17.6	6000
628301	1000 (61)	1.117	1.857	345	1.997	26x9	0.031	75	2.379	5597	19.0	8000
628303	1000 (61)	1.117	1.857	345	1.997	21x8	0.031	75	2.408	5658	19.3	8000

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

* Pulling tension based on pulling eye directly connected to conductor

Table 2 – Electrical and Engineering Data

Cond. Size	DC Resistance @ 25°C	AC Resistance @ 90°C	Capacitive Reactance @ 60Hz	Inductive Reactance @ 60Hz	Charging Current	Dielectric Loss	Zero Sequence Impedance	Positive Sequence Impedance	Short Circuit Current @ 30 Cycle	Allowable Ampacity in Duct 90°C	Allowable Ampacity Directly Buried 90°C
AWG/Kcmil	Ω/1000ft	Ω/1000ft	MΩ*1000ft	Ω/1000ft	A/1000ft	W/1000ft	Ω/1000ft	Ω/1000ft	Amp	Amp	Amp
1/0 (Solid)	0.102	0.128	0.072	0.055	0.278	1.7	0.182 + j1.137	0.128 + j0.448	3138	210	250
1/0 (19)	0.102	0.128	0.067	0.053	0.298	1.8	0.182 + j1.084	0.128 + j0.397	3138	210	250
2/0 (19)	0.081	0.102	0.063	0.051	0.318	1.9	0.156 + j1.036	0.102 + j0.350	3836	235	280
3/0 (19)	0.064	0.081	0.059	0.049	0.339	2.1	0.135 + j0.990	0.081 + j0.306	4882	265	320
4/0 (19)	0.051	0.065	0.054	0.047	0.368	2.2	0.119 + j0.950	0.065 + j0.267	6277	300	360
250 (37)	0.043	0.056	0.051	0.047	0.389	2.4	0.110 + j0.921	0.056 + j0.242	7323	328
350 (37)	0.031	0.041	0.046	0.045	0.438	2.7	0.095 + j0.871	0.041 + j0.199	9973	400	460
500 (37)	0.022	0.030	0.040	0.043	0.492	3.0	0.084 + j0.828	0.030 + j0.161	14406	470	525
750 (61)	0.014	0.023	0.034	0.041	0.580	3.5	0.077 + j0.785	0.023 + j0.125	22019	560	590
1000 (61)	0.011	0.019	0.031	0.039	0.646	3.9	0.073 + j0.759	0.019 + j0.104	28878
1000 (61)	0.011	0.019	0.031	0.039	0.646	3.9	0.073 + j0.758	0.019 + j0.104	29419

*Ampacities for Direct Buried are based on ICEA P-117-734-2016 Single-Conductor Solid Dielectric 15-35kV. Single Circuit Flat Direct Buried Figure 3
*Ampacities for Duct are based on ICEA P-117-734-2016 for Single-Conductor Solid Dielectric 15-35kV. Single Circuit Trefoil Conduit Figure 7.
*Sequence Impedance values are based on Rho Earth Resistivity: 100 Ohm-Meter/1000ft, Spacing: one diameter spacing center-to-center.

Table 3 – Weights and Measurements (Metric)

Stock Number	Cond. Size	Diameter Over Conductor	Diameter Over Insulation	Insul. Thickness	Diameter Over Insulation Shield	Concentric Neutral	Neutral DC Resistance 25°C	Jacket Thickness	Approx. OD	Approx. Weight	Min Bending Radius	Max Pull Tension
	AWG/Kcmil	mm	mm	mm	mm	No. x AWG	Ω/km	mm	mm	kg/km	mm	newton
TBA	1/0 (Solid)	8.23	26.72	8.76	29.51	9x14	0.96	1.27	35.31	1618	281.94	3756
628241	1/0 (19)	9.17	27.48	8.76	30.28	9x14	0.96	1.27	36.07	1572	289.56	3756
628244	2/0 (19)	10.29	28.60	8.76	31.39	11x14	0.78	1.27	37.19	1781	297.18	4735
TBA	3/0 (19)	11.58	30.07	8.76	32.87	14x14	0.61	1.27	38.66	2159	309.88	5972
628247	4/0 (19)	13.00	31.29	8.76	34.09	18x14	0.48	1.27	39.88	2383	320.04	7529
TBA	250 (37)	14.17	32.87	8.76	35.66	21x14	0.41	1.91	42.72	2930	342.90	8900
628287	350 (37)	16.79	35.33	8.76	38.13	18x12	0.30	1.91	46.13	3542	368.30	12460
TBA	500 (37)	20.04	38.73	8.76	42.29	26x12	0.21	1.91	50.22	4825	401.32	17800
628294	750 (61)	24.59	43.38	8.76	46.94	25x10	0.13	1.91	56.01	6567	447.04	26700
628301	1000 (61)	28.37	47.17	8.76	50.72	26x9	0.10	1.91	60.43	8329	482.60	35600
628303	1000 (61)	28.37	47.17	8.76	50.72	21x8	0.10	1.91	61.16	8420	490.22	35600

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

* Pulling tension based on pulling eye directly connected to conductor

Table 4 – Electrical and Engineering Data (Metric)

Cond. Size	DC Resistance @ 25°C	AC Resistance @ 90°C	Capacitive Reactance @ 60Hz	Inductive Reactance @ 60Hz	Charging Current	Dielectric Loss	Zero Sequence Impedance*	Positive Sequence Impedance*	Short Circuit Current @ 30 Cycle	Allowable Ampacity in Duct 90°C	Allowable Ampacity Directly Buried 90°C
AWG/Kcmil	Ω/km	Ω/km	MΩ*km	Ω/km	A/km	W/km	Ω/1000ft	Ω/1000ft	Amp	Amp	Amp
1/0 (Solid)	0.3346	0.42	0.0219	0.1804	0.912	5.5774	0.182 + j1.137	0.128 + j0.448	3138	210	250
1/0 (19)	0.3346	0.42	0.0204	0.1739	0.978	5.9055	0.182 + j1.084	0.128 + j0.397	3138	210	250
2/0 (19)	0.2657	0.33	0.0192	0.1673	1.043	6.2336	0.156 + j1.036	0.102 + j0.350	3836	235	280
3/0 (19)	0.2100	0.27	0.0180	0.1608	1.112	6.8898	0.135 + j0.990	0.081 + j0.306	4882	265	320
4/0 (19)	0.1673	0.21	0.0165	0.1542	1.207	7.2178	0.119 + j0.950	0.065 + j0.267	6277	300	360
250 (37)	0.1411	0.18	0.0155	0.1542	1.276	7.8740	0.110 + j0.921	0.056 + j0.242	7323	328
350 (37)	0.1017	0.13	0.0140	0.1476	1.437	8.8583	0.095 + j0.871	0.041 + j0.199	9973	400	460
500 (37)	0.0722	0.10	0.0122	0.1411	1.614	9.8425	0.084 + j0.828	0.030 + j0.161	14406	470	525
750 (61)	0.0459	0.08	0.0104	0.1345	1.903	11.4829	0.077 + j0.785	0.023 + j0.125	22019	560	590
1000 (61)	0.0361	0.06	0.0094	0.1280	2.119	12.7953	0.073 + j0.759	0.019 + j0.104	28878
1000 (61)	0.0361	0.06	0.0094	0.1280	2.119	12.7953	0.073 + j0.758	0.019 + j0.104	29419

Revision: 1.000.000

Updated On: July 3, 2024, 10:19 p.m. UTC

Concentric Neutral Calculator