SPEC 26352

HVTECK CU 3/C 220TRXLPE TS PVC AIA PVC 15kV 133% CSA

3 Conductor, 220 Mils Tree Retardant Cross Linked Polyethylene, 133% Insulation Level, Tape Shield, Polyvinyl Chloride (PVC) Inner Jacket, Aluminum Interlocked Armour (AIA), Polyvinyl Chloride (PVC) Jacket

...

Construction:

  1. Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
  2. Conductor Shield:Semi-conducting cross-linked copolymer
  3. Insulation:220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level
  4. Insulation Shield:Strippable semi-conducting cross-linked copolymer
  5. Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
  6. Filler:Interstices filled with non-hydroscoping/non-wicking fillers
  7. Grounding Conductor:Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8
  8. Binder:Polypropylene tape
  9. Inner Jacket:PVC inner jacket
  10. Armour:Aluminum Interlocked Armour (AIA)
  11. Overall Jacket:Red Polyvinyl Chloride (PVC) Jacket

Applications and Features:

Southwire's 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs /FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.

Specifications:

  • ASTM B3 Soft or Annealed Copper Wire
  • ASTM B8 Concentric-Lay-Stranded Copper Conductors
  • CSA C22.2 No. 174 Cables in Hazardous Locations
  • CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
  • CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
  • CSA C68.3 Shielded & Concentric Neutral Power Cable - 5 to 46 kV
  • CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
  • CSA HL - for Hazardous Locations rating
  • CSA SUN RES - for Sunlight Resistant rating
  • ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
  • ICEA T-29-520 Flame Test (210,000 BTU/Hr)
  • IEEE 383 Flame Test (70,000 btu)
  • IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
  • FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)
  • AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
  • Sample Print Legend:

    (CSA) SOUTHWIRE (NESC) #P# 3/C [#AWG or #kcmil] CU 220 TRXLPE AIA 15kV 133% INS LEVEL 25% TS SUN RES 105°C FT4 HL (-40°C) LTGG RoHS YEAR [SEQUENTIAL METER MARKS]
    Table 1 – Weights and Measurements
    Stock NumberCond. SizeStrandDiameter Over ConductorDiameter Over InsulationInsul. ThicknessDiameter Over Insulation ShieldGround SizeInner Jacket ThicknessDia. Over ArmourOverall Jacket ThicknessApprox. ODCopper WeightApprox. Weight
    AWG/KcmilNo.inchinchmilinchAWGmilinchmilinchlb/1000ftlb/1000ft
    652980270.2820.7552200.81561102.387752.5379062947
    596312^270.2820.7552200.81561102.387752.5379062936
    1381601190.3220.8002200.86061102.471752.62110763207
    596307^1190.3220.8002200.86061102.471752.62110763197
    1389781/0190.3610.8402200.90061102.557752.70712903547
    596302^1/0190.3610.8402200.90061102.557752.70712903547
    5995212/0190.4050.8842200.94461102.652752.80215573949
    596297^2/0190.4050.8842200.94461102.652752.80215573938
    TBA3/0190.4560.9342200.99441102.766752.91617574476
    5991344/0190.5120.9902201.05041102.881753.03124015085
    592993^4/0190.5120.9902201.05041102.881753.03124015072
    669259250370.5581.0442201.10441102.998753.14827385613
    599133350370.6611.1472201.20731253.270853.44037737156
    596108^350370.6611.1472201.20731253.270853.44037737140
    592992^500370.7891.2752201.33531253.547853.71752599009
    599107500370.7891.2752201.33531253.547853.71752599032
    599523750610.9681.4642201.52421253.955854.125758611996
    596289^750610.9681.4642201.52421253.955854.125758611977
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination
    ^ Black outer jacket
    Table 2 – Electrical and Engineering Data
    Cond. SizeMin Bending RadiusMax Pull TensionDC Resistance @ 25°CAC Resistance @ 90°CCapacitive Reactance @ 60HzInductive Reactance @ 60HzZero Sequence ImpedancePositive Sequence ImpedancePhase Short Circuit Current @ 6 CyclesAllowable Ampacity In Air 90°CAllowable Ampacity Directly Buried 90°C
    AWG/KcmilinchlbΩ/1000ftΩ/1000ftMΩ*1000ftΩ/1000ftΩ/1000ftΩ/1000ftAmpAmpAmp
    217.815920.1620.2040.0620.0470.579 + j0.4210.204 + j0.0482571172201
    217.815920.1620.2040.0620.0470.579 + j0.4210.204 + j0.0482571172201
    118.320080.1280.1620.0580.0450.535 + j0.4020.162 + j0.0452695197228
    118.320080.1280.1620.0580.0450.535 + j0.4020.162 + j0.0452695197228
    1/018.925340.1020.1280.0530.0430.500 + j0.3850.128 + j0.0432816225257
    1/018.925340.1020.1280.0530.0430.500 + j0.3850.128 + j0.0432816225257
    2/019.631940.0810.1020.0500.0420.471 + j0.3670.102 + j0.0422952260292
    2/019.631940.0810.1020.0500.0420.471 + j0.3670.102 + j0.0422952260292
    3/020.440270.0640.0810.0460.0400.447 + j0.3470.081 + j0.0403110297330
    4/021.250780.0510.0650.0420.0390.426 + j0.3280.065 + j0.0393284342372
    4/021.250780.0510.0650.0420.0390.426 + j0.3280.065 + j0.0393284342372
    25022.060000.0430.0560.0390.0380.413 + j0.3100.056 + j0.0383451376410
    35024.184000.0310.0410.0350.0360.388 + j0.2800.041 + j0.0363770460487
    35024.184000.0310.0410.0350.0360.388 + j0.2800.041 + j0.0363770460487
    50026.0120000.0220.0300.0300.0340.365 + j0.2480.030 + j0.0344167556573
    50026.0120000.0220.0300.0300.0340.365 + j0.2480.030 + j0.0344167556573
    75028.9180000.0140.0230.0260.0320.339 + j0.2100.024 + j0.0324752678668
    75028.9180000.0140.0230.0260.0320.339 + j0.2100.024 + j0.0324752678668
    * Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.
    * CEC ampacities are based on:
    3/C in air copper and aluminum: D17N
    3/C direct buried copper and aluminum: D17E
    Table 3 – Weights and Measurements (Metric)
    Stock NumberCond. SizeStrandDiameter Over ConductorDiameter Over InsulationInsul. ThicknessDiameter Over Insulation ShieldGround SizeInner Jacket ThicknessDia. Over ArmourOverall Jacket ThicknessApprox. ODCopper WeightApprox. Weight
    AWG/KcmilNo.mmmmmmmmAWGmmmmmmmmkg/kmkg/km
    652980277.1619.185.5920.7062.7960.631.9164.4413484386
    596312^277.1619.185.5920.7062.7960.631.9164.4413484369
    1381601198.1820.325.5921.8462.7962.761.9166.5716014773
    596307^1198.1820.325.5921.8462.7962.761.9166.5716014758
    1389781/0199.1721.345.5922.8662.7964.951.9168.7619205279
    596302^1/0199.1721.345.5922.8662.7964.951.9168.7619205279
    5995212/01910.2922.455.5923.9862.7967.361.9171.1723175877
    596297^2/01910.2922.455.5923.9862.7967.361.9171.1723175860
    TBA3/01911.5823.725.5925.2542.7970.261.9174.0726156661
    5991344/01913.0025.155.5926.6742.7973.181.9176.9935737567
    592993^4/01913.0025.155.5926.6742.7973.181.9176.9935737548
    6692592503714.1726.525.5928.0442.7976.151.9179.9640758353
    5991333503716.7929.135.5930.6633.1883.062.1687.38561510649
    596108^3503716.7929.135.5930.6633.1883.062.1687.38561510625
    592992^5003720.0432.395.5933.9133.1890.092.1694.41782613407
    5991075003720.0432.395.5933.9133.1890.092.1694.41782613441
    5995237506124.5937.195.5938.7123.18100.462.16104.771128917852
    596289^7506124.5937.195.5938.7123.18100.462.16104.771128917824
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination
    ^ Black outer jacket
    Table 4 – Electrical and Engineering Data (Metric)
    Cond. SizeMin Bending RadiusMax Pull TensionDC Resistance @ 25°CAC Resistance @ 90°CCapacitive Reactance @ 60HzInductive Reactance @ 60HzZero Sequence ImpedancePositive Sequence ImpedancePhase Short Circuit Current @ 6 CyclesAllowable Ampacity In Air 90°CAllowable Ampacity Directly Buried 90°C
    AWG/KcmilmmnewtonΩ/kmΩ/kmMΩ*kmΩ/kmΩ/1000ftΩ/1000ftAmpAmpAmp
    2452.1270840.53150.670.01890.15420.579 + j0.4210.204 + j0.0482571172201
    2452.1270840.53150.670.01890.15420.579 + j0.4210.204 + j0.0482571172201
    1464.8289360.41990.530.01770.14760.535 + j0.4020.162 + j0.0452695197228
    1464.8289360.41990.530.01770.14760.535 + j0.4020.162 + j0.0452695197228
    1/0480.06112760.33460.420.01620.14110.500 + j0.3850.128 + j0.0432816225257
    1/0480.06112760.33460.420.01620.14110.500 + j0.3850.128 + j0.0432816225257
    2/0497.84142130.26570.330.01520.13780.471 + j0.3670.102 + j0.0422952260292
    2/0497.84142130.26570.330.01520.13780.471 + j0.3670.102 + j0.0422952260292
    3/0518.16179200.21000.270.01400.13120.447 + j0.3470.081 + j0.0403110297330
    4/0538.48225970.16730.210.01280.12800.426 + j0.3280.065 + j0.0393284342372
    4/0538.48225970.16730.210.01280.12800.426 + j0.3280.065 + j0.0393284342372
    250558.80267000.14110.180.01190.12470.413 + j0.3100.056 + j0.0383451376410
    350612.14373800.10170.130.01070.11810.388 + j0.2800.041 + j0.0363770460487
    350612.14373800.10170.130.01070.11810.388 + j0.2800.041 + j0.0363770460487
    500660.40534000.07220.100.00910.11150.365 + j0.2480.030 + j0.0344167556573
    500660.40534000.07220.100.00910.11150.365 + j0.2480.030 + j0.0344167556573
    750734.06801000.04590.080.00790.10500.339 + j0.2100.024 + j0.0324752678668
    750734.06801000.04590.080.00790.10500.339 + j0.2100.024 + j0.0324752678668
    * Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.
    * CEC ampacities are based on:
    3/C in air copper and aluminum: D17N
    3/C direct buried copper and aluminum: D17E

    Revision: 1.000.000

    Updated On: July 12, 2024, 5:48 p.m. UTC