Mining SPEC 47322

Products > Industrial Products > Mining > SPEC47322

SPEC 47322

CSA 3/C CU 5KV Type SHD-GC RHINOSHIELD^TM CPE Mining Cable 90°C. MSHA Approved

Flexible Copper conductors, EPR 100% Insulation Level, Cu/Nylon Braid Shield, Extra Heavy Duty Two Layer Chlorinated Polyethylene (CPE) Jacket with Optional Reflective Stripes

Download PDF

Construction:

Conductor:Tin coated, soft drawn, annealed, flexible, rope-lay stranded copper per ASTM B33/B172
Separator Tape:Semi-conducting tape applied between the conductor and insulation to facilitate stripping
Conductor Shield:Semi-conducting cross-linked copolymer
Insulation:Ethylene Propylene Rubber (EPR) 100% Insulation Level
Insulation Shield:Semi-conducting cross-linked copolymer
Shield Separator:Semi-conducting SBR tape applied to the phase insulation with a 50% overlap, adhesive side up
Braid Shield:Tin coated, soft drawn, annealed, copper braid shield (60% minimum coverage), combined with color coded nylon (black, white, red) with a 40% maximum coverage
Ground Check Conductor:Tin coated, soft drawn, annealed, rope stranded, flexible lay copper per ASTM B33/B172 with yellow, high strength, polypropylene insulation
Ground Conductors:Two uninsulated, tin coated, soft drawn, annealed, rope stranded, flexible lay copper per ASTM B33/B172
Tape:SBR tape applied over the cabled core for improved mechanical integrity and ease of stripping
Inner Jacket:Black, mold cured, extra heavy-duty modified integral fill flame resistant, thermosetting Chlorinated Polyethylene
Reinforcement:Reinforcing twine applied between the two jacket layers
Outer Jacket:Black, mold cured, extra heavy-duty, flame resistant, thermosetting Chlorinated Polyethylene (CPE). Other colors available
Reflective Stripe:Highly visible reflective stripe embedded into the outer jacket to increase safety and help prevent cable runover (optional, contact your sales representative for part number)

Applications and Features:

RHINOSHIELD^TM Type SHD-GC is a heavy-duty trailing cable where flexibility and maximum protection is required. For use with mobile, reeling, or stationary mining equipment, continuous mining machines, longwall mining systems, and blast hole drillers. It is also an ex- cellent choice for shovels, draglines, dredges, cranes and marine shore-to-ship power supplies, and anytime extra-durable, flexible cable is required. Suitable for continuous submersion in water. Ground check conductor provides fail-safe ground monitoring. Embossed print legend for easy cable identification. Cold Bend and Impact Tested to -50°C.

Specifications:

ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire

ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors

CSA C22.2 No. 96 Portable Power Cables

ICEA S-75-381 Portable and Power Feeder Cables for Use in Mines

Sample Print Legend:

SOUTHWIRE{R} RHINO{TM} BRAND CABLE XXX AWG CU 3/C EPR TYPE SHD-GC 5000V -50{D}C 90{D}C SUN RES {CSA} LL90458 FT1 FT5 P-07-KA-140005-MSHA

Table 1 – Weights and Measurements

Stock Number	Cond. Size	Cond. Number	Cond. Strands	Diameter Over Conductor	Insul. Thickness	Diameter Over Insulation	Ground	Ground Check Size	Ground Check Strands	Ground Check Insulation Thickness	Jacket Thickness	Approx. OD	Approx. Weight
	AWG/Kcmil	No.	No.	inch	mil	inch	No. x AWG	AWG	No.	mil	mil	inch	lb/1000ft
TBA	6	3	133	0.21	110	0.496	2 x 10	8	168	45	185	1.56	1480
TBA	4	3	259	0.256	110	0.542	2 x 8	8	168	45	185	1.68	1830
TBA	3	3	259	0.285	110	0.571	2 x 7	8	168	45	205	1.78	2100
597844	2	3	308	0.32	110	0.606	2 x 6	8	168	60	205	1.85	2234
TBA	2	3	308	0.32	110	0.606	2 x 6	8	168	45	205	1.87	2400
664959	1	3	385	0.355	110	0.631	2 x 5	8	168	45	220	1.963	2623
TBA	1/0	3	273	0.385	110	0.671	2 x 4	8	168	45	220	2.08	3230
646499	2/0	3	324	0.42	110	0.714	2 x 3	8	168	60	248	2.17	3094
TBA	3/0	3	418	0.506	110	0.792	2 x 2	8	168	45	235	2.36	4460
677992^	4/0	3	532	0.577	110	0.83	2 x 1	8	168	60	340	2.48	4649
TBA	250	3	608	0.61	120	0.916	2 x 1/0	6	133	60	250	2.69	6190
TBA	300	3	735	0.680	120	1.043	2 x 1/0	6	133	60	250	2.81	6790
TBA	350	3	855	0.72	120	1.026	2 x 2/0	6	133	60	265	2.95	7900
599538^^	500	3	1221	0.9	120	1.188	2 x 4/0	6	133	60	280	3.31	8648

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

^ Reflective stripe with red jacket
^^ Red jacket

Table 2 – Electrical and Engineering Data

Cond. Size	DC Resistance @ 25°C	AC Resistance @ 90°C	Capacitive Reactance	Inductive Reactance	Working Tension	Min Bending Radius	Allowable Ampacity In Air 90°C
AWG/Kcmil	Ω/1000ft	Ω/1000ft	MΩ*1000ft	MΩ/1000ft	lb	inch	Amp
6	0.421	0.526	0.046	0.041	179.000	9.4	93
4	0.267	0.334	0.040	0.039	285.000	10.1	122
3	0.212	0.265	0.038	0.038	360.000	10.7	140
2	0.168	0.210	0.034	0.036	454.000	11.2	159
2	0.168	0.210	0.034	0.036	454.000	11.2	159
1	0.133	0.166	0.032	0.035	572.000	11.7	184
1/0	0.111	0.139	0.030	0.034	722.000	12.5	211
2/0	0.085	0.106	0.028	0.034	910.000	13.2	243
3/0	0.067	0.084	0.024	0.032	1147.000	14.2	279
4/0	0.053	0.066	0.022	0.031	1446.000	15	321
250	0.045	0.056	0.022	0.031	1709.000	16.1	355
300	0.037	0.046	0.019	0.030	2051.000	16.9	398
350	0.032	0.040	0.019	0.030	2393.000	17.7	435
500	0.023	0.029	0.016	0.028	3418.000	19.9	536

* Inductive impedance is based on non-ferrous conduit with one diameter spacing.

Revision: 1.000.000