• Manufactured by continuously extruding HDPE loosely around the cable assembly with no adhesion between the conduit and the cable, thus leaving the cables free in the conduit. • Lubrication is applied to the cable, allowing for cables to be pulled out and replaced if necessary. • All cables are installed as single conductors or paralleled in HDPE conduit and are available in Standard Wall, Schedule 40 • Other constructions are available upon request.
Applications and Features:
Commonly installed from transformer to transformer or as underground cables exiting substations. Also, can be used in street lighting, DOT, parking lots and parking decks.
ASTM D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D3485 Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
ASTM F2160 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
UL 1990 Standard for Nonmetallic Underground Conduit with Conductors
CSA CSA marking is available upon request
Buy American: Compliant with Buy American Requirements, found in 49 U.S.C. § 5323(j); specify “Made in the USA Only!” when ordering to ensure your project receives American made products.
NEMA TC-7 Smooth-Wall Coilable Electrical Polyethylene Conduit