Transit / Buy America(n) Compliant SPEC 48010

Products > Industrial Products > Transit / Buy America(n) Compliant > SPEC48010

SPEC 48010

1/C CU 600V Tray Rated LSZH RW90 VW-1 Cable SOLONONplus^® Living Building Challenge™ (LBC) Red List Free

SOLONONplus® 600 Volt Single Conductor Copper Cross Linked Polyolefin Low Smoke Zero Halogen (XLPO LSZH) Insulation Type RW 90

Download PDF

Construction:

Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
Insulation:SOLONONplus® Cross Linked Polyolefin Low Smoke Zero Halogen (XLPO LSZH) Type RW 90 VW-1

Applications and Features:

Southwire’s 600 Volt SOLONONplus® Type RW 90 VW-1 cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial and aerially when supported by a messenger. These cables are ideal for use in establishments where low smoke and low acid emissions are desired for public safety and health and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions.

a. The conductors are available in tinned and flexible copper stranding upon request.
b. Color Available upon request
c. Listed and marked CSA VW-1 for all sizes
d. The halogen content is less than 0.2% and Acid gas less than 2.0%
e. CSA listed for TC use on 1/0 and Larger. 70,000 BTU/Hr. Vertical Flalme Test (CSA C22.2 NO. 2556)
f. CSA listed FT4/IEEE 1202 and ST-1 (1/0 and larger)
g. -40°C Cold impact and cold bend
h. PRI Oil resistance I at 60°C & PRII Oil resistance II at 75°C
i. GRI gasoline and oil resistance at 60°C
j. GRII gasoline and oil resistance at 75°C
k. REACH & RoHS compliant
l. Listed and marked HAL-FREE (Halogen Free) per CSA 2556-15
m. Living Building Challenge™ (LBC) Red List Free

Specifications:

ASTM B3 Standard Specification for Soft or Annealed Copper Wire

ASTM B8 Concentric-Lay-Stranded Copper Conductors

ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire

ASTM B170 Oxygen Free Electrolytic Copper (available upon request)

CSA C22.2 No. 38 Thermoset-insulated wires and cables Type RW90

CSA C22.2 No.230 Tray Cables - Rated TC-ER (1/0 AWG and Larger)

CSA C22.2 No. 2556 / UL 2556 Cable Test Methods

ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy

ICEA T-33-655/MIL-C-24643 Low Smoke Halogen Free (LSHF) Polymeric Jackets

IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test

ISO 9001 Quality management

NFPA 130 Standard for Fixed Guideway Transit and Passenger Rail Systems (500kcmil & Larger)

NFPA 502 Standard for Road Tunnels, Bridges, and Other Limited Access Highways

Sample Print Legend:

1/0 AWG and larger cables

SOUTHWIRE SOLONONplus (TM) LSZH XLPO 156205 MASTER-DESIGN {CSA} 1/0 AWG (XXX mm2) CU RW90 600V VW-1 HAL-FREE TC PRI PRII GRI GRII -40{D}C SR FT4 ST-1 {SEQUENTIAL METER MARKS} SEQ METERS [date code]

Table 1 – Weights and Measurements

Stock Number	Cond. Size	Strand	Insul. Thickness	Approx. OD	Approx. Weight	Min Bending Radius	DC Resistance @ 25°C	AC Resistance @ 90°C	Inductive Reactance @ 60Hz	Allowable Ampacity In Raceway 90°C†
	AWG/Kcmil	No.	mil	inch	lb/1000ft	inch	Ω/1000ft	Ω/1000ft	Ω/1000ft	Amp
TBA	14	7	30	0.13	16	0.5	2.631	3.17	0.058	25
TBA	12	7	30	0.148	25	0.5	1.662	2.002	0.054	30
TBA	10	7	30	0.173	39	0.6	1.04	1.253	0.05	40
TBA	8	7	45	0.231	63	0.9	0.653	0.786	0.052	55
TBA	6	7	45	0.267	97	1.0	0.411	0.495	0.051	75
TBA	4	7	45	0.315	147	1.2	0.258	0.31	0.048	95
TBA	3	7	45	0.342	183	1.3	0.205	0.246	0.047	115
TBA	2	7	45	0.372	228	1.4	0.162	0.195	0.045	130
TBA	1	19	55	0.432	291	1.7	0.128	0.154	0.046	145
TBA	1/0	19	55	0.471	362	1.8	0.102	0.122	0.044	170
TBA	2/0	19	55	0.515	451	2.0	0.081	0.097	0.043	195
TBA	3/0	19	55	0.566	564	2.2	0.064	0.078	0.042	225
TBA	4/0	19	55	0.622	704	2.4	0.051	0.062	0.041	260
TBA	250	37	65	0.688	837	2.7	0.043	0.053	0.041	290
TBA	350	37	65	0.791	1158	3.1	0.031	0.039	0.040	350
TBA	500	37	65	0.919	1634	3.6	0.022	0.029	0.039	430
TBA	600	61	80	1.025	1976	5.1	0.018	0.025	0.039	475
TBA	750	61	80	1.128	2453	5.6	0.014	0.022	0.038	535
TBA	1000	61	80	1.277	3244	6.3	0.011	0.018	0.037	615

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

Table 2 – Weights and Measurements (Metric)

Stock Number	Cond. Size	Strand	Insul. Thickness	Approx. OD	Approx. Weight	Min Bending Radius	DC Resistance @ 25°C	AC Resistance @ 90°C	Inductive Reactance @ 60Hz	Allowable Ampacity In Raceway 90°C†
	AWG/Kcmil	No.	mm	mm	kg/km	mm	Ω/km	Ω/km	Ω/km	Amp
TBA	14	7	0.76	3.30	24	12.70	8.6319	10.40	0.1903	25
TBA	12	7	0.76	3.76	37	12.70	5.4528	6.57	0.1772	30
TBA	10	7	0.76	4.39	58	15.24	3.4121	4.11	0.1640	40
TBA	8	7	1.14	5.87	94	22.86	2.1424	2.58	0.1706	55
TBA	6	7	1.14	6.78	144	25.40	1.3484	1.62	0.1673	75
TBA	4	7	1.14	8.00	219	30.48	0.8465	1.02	0.1575	95
TBA	3	7	1.14	8.69	272	33.02	0.6726	0.81	0.1542	115
TBA	2	7	1.14	9.45	339	35.56	0.5315	0.64	0.1476	130
TBA	1	19	1.40	10.97	433	43.18	0.4199	0.51	0.1509	145
TBA	1/0	19	1.40	11.96	539	45.72	0.3346	0.40	0.1444	170
TBA	2/0	19	1.40	13.08	671	50.80	0.2657	0.32	0.1411	195
TBA	3/0	19	1.40	14.38	839	55.88	0.2100	0.26	0.1378	225
TBA	4/0	19	1.40	15.80	1048	60.96	0.1673	0.20	0.1345	260
TBA	250	37	1.65	17.48	1246	68.58	0.1411	0.17	0.1345	290
TBA	350	37	1.65	20.09	1723	78.74	0.1017	0.13	0.1312	350
TBA	500	37	1.65	23.34	2432	91.44	0.0722	0.10	0.1280	430
TBA	600	61	2.03	26.03	2941	129.54	0.0591	0.08	0.1280	475
TBA	750	61	2.03	28.65	3650	142.24	0.0459	0.07	0.1247	535
TBA	1000	61	2.03	32.44	4828	160.02	0.0361	0.06	0.1214	615