Name: 3/C CU 25kV 320 NLEPR 133% PVC MV-105
Brand: Southwire
Rating: 5 (1 reviews)

Products > Industrial Products > Medium Voltage / Buy America(n) Compliant > SPEC46602

SPEC 46602

3/C CU 25kV 320 NLEPR 133% PVC MV-105

Type MV-105 Three Conductor Copper, 320 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level, Tape Shield, Polyvinyl Chloride (PVC) Jacket, Dual Rated UL/CSA. Silicone Free

Download PDF Download Excel Table

Construction:

Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
Conductor Shield:Semi-conducting cross-linked copolymer
Insulation:320 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level,
Insulation Shield:Strippable semi-conducting cross-linked copolymer
Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
Grounding Conductor:Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
Filler:Wax paper filler
Binder:Poly glass tape
Overall Jacket:Polyvinyl Chloride (PVC)

Applications and Features:

Southwire’s 25KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend. For uses in Class I and II, Division 2 hazardous locations per NEC Article 501 and 502.Rated for 1000 lbs./FT maximum sidewall pressure.

Specifications:

ASTM B3 Standard Specification for Soft or Annealed Copper Wire

ASTM B8 Concentric-Lay-Stranded Copper Conductors

ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire

UL 1072 Medium-Voltage Power Cables

UL 1685 Vertical-Tray Fire Propagation and Smoke Release Test

CSA C22.2 No.230 Tray Cables - Rated TC-ER

CSA C22.2 No. 2556 / UL 2556 Cable Test Methods

CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV

ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable

AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV

Made in America: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661

Sample Print Legend:

{SQFTG_DUAL} SOUTHWIRE{R} POWER CABLE MASTER-DESIGN {UL} 3/C XXX KCMIL CU 320 MILS NL-EPR 25KV 133% INS LEVEL 25%TS GW 1 X X AWG CU MV-105 FOR CT USE SUN. RES. FOR DIRECT BURIAL -- CSA 500 KCMIL CU 8.13mm (320 mils) NL-EPR 25KV 133% INS LEVEL 25%TS SR TC-ER 90{D}C FT4 -40{D}C LTGG {NESC}

Table 1 – Weights and Measurements

Stock Number	Cond. Size	Diameter Over Conductor	Diameter Over Insulation	Diameter Over Insulation Shield	Ground	Jacket Thickness¹	Approx. OD	Approx. Weight	Max Pull Tension	Min Bending Radius
	AWG/Kcmil	inch	inch	inch	No. x AWG	mil	inch	lb/1000ft	lb	inch
TBA	1	0.322	1	1.06	1 x 4	110	2.564	3250	2008	17.9
647379	1/0	0.361	1.04	1.1	1 x 6	110	2.649	3505	2534	18.5
TBA	2/0	0.405	1.083	1.143	1 x 4	135	2.794	4102	3194	19.5
TBA	3/0	0.456	1.134	1.194	1 x 3	135	2.904	4628	4027	20.3
TBA	4/0	0.512	1.19	1.25	1 x 3	135	3.025	5217	5078	21.1
672603	250	0.558	1.244	1.304	1 x 2	135	3.11	5667	6000	21.7
TBA	350	0.661	1.347	1.407	1 x 2	135	3.364	7086	8400	23.5
679305	500	0.789	1.452	1.512	1 x 1	135	3.594	8802	12000	25.1

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination

Table 2 – Electrical and Engineering Data

Cond. Size	DC Resistance @ 25°C	AC Resistance @ 90°C	Capacitive Reactance @ 60Hz	Inductive Reactance @ 60Hz	Zero Sequence Impedance*	Positive Sequence Impedance*	Shield Short Circuit Current 6 Cycles	Allowable Ampacity In Duct 90/105°C^†	Allowable Ampacity In Air 90/105°C^‡
AWG/Kcmil	Ω/1000ft	Ω/1000ft	MΩ*1000ft	Ω/1000ft	Ω/1000ft	Ω/1000ft	Amp	Amp	Amp
1	0.128	0.162	0.0597	0.0494	0.527 + j0.364	0.162 + j0.05	3040	170/185	185/210
1/0	0.102	0.128	0.0557	0.0476	0.49 + j0.35	0.128 + j0.048	3152	195/210	215/240
2/0	0.081	0.102	0.0521	0.0459	0.461 + j0.336	0.102 + j0.046	3278	220/235	245/275
3/0	0.064	0.081	0.0483	0.0441	0.436 + j0.32	0.081 + j0.044	3424	250/270	285/315
4/0	0.051	0.065	0.0448	0.0425	0.416 + j0.303	0.065 + j0.043	3585	285/305	325/360
250	0.043	0.056	0.0427	0.0415	0.402 + j0.289	0.056 + j0.042	3740	310/335	360/400
350	0.031	0.041	0.0381	0.0393	0.378 + j0.263	0.041 + j0.039	4035	375/400	435/490
500	0.022	0.03	0.0337	0.0372	0.355 + j0.236	0.031 + j0.037	4403	450/485	535/600

* Calculations are based on 5 mil 25 % over lapping copper tape shield / Conductor temperature of 90°C / Shield temperature of 45°C / Earth resistivity of 100 ohms-meter
† Ampacities are based on TABLE 310.60(C)(79) Detail 1. of the 2020 National Electrical Code (20°C Ambient Earth Temperature, Thermal Resistance ROH of 90)
‡ Ampacities are based on TABLE 310.60(C)(71) of the 2020 National Electrical Code (40°C Ambient Air Temperature)

Revision: 3.0.00C