Name: Multi-Conductor CU 600 V PE/PVC Insulation PVC Jacket Power Cable Color Method 1 Table 1
Brand: Southwire
Rating: 5 (1 reviews)

Products > Utility Products > Substation Control / Buy America(n) Compliant > SPEC85012

SPEC 85012

Multi-Conductor CU 600 V PE/PVC Insulation PVC Jacket Power Cable Color Method 1 Table 1

Power Cable 600 Volt Copper Conductors, Polyethylene and Polyvinyl Chloride (PE/PVC) Insulation Polyvinyl Chloride (PVC) Jacket, Control Cable Conductor Identification Method 1 Table 1. Silicone Free

Download PDF

Construction:

Conductor:7 strands class B compressed bare copper per ASTM B3 and ASTM B8
Insulation:Polyethylene (PE) and Polyvinyl Chloride (PVC)
Filler:Polypropylene filler on cables with 5 or less conductors
Binder:Polyester flat thread binder tape applied for cables with more than 5 conductors
Rip Cord:Rip cord for ease of jacket removal
Overall Jacket:Polyvinyl Chloride (PVC) Jacket

Applications and Features:

Southwire’s 600 Volt power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 75°C for normal operation in wet and dry locations, 90°C for emergency overload, and 150°C for short circuit conditions.

Specifications:

ASTM B3 Standard Specification for Soft or Annealed Copper Wire

ASTM B8 Concentric-Lay-Stranded Copper Conductors

CSA CSA marking is available upon request

ICEA S-58-679 Control Cable Conductor Identification Method 1 Table 1

ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy

Sample Print Legend:

Non UL Listed
SOUTHWIRE XX AWG X/C PE/PVC CDRS 75C PVC JACKET SUNLIGHT RESISTANT DIRECT BURIAL 600V {MM/DD/YYYY} {SEQUENTIAL FOOTAGE MARKS} SEQ FEET

Table 1 – Physical and Electrical Data

Stock Number	Cond. Size	Cond. Number	Cond. Strands	Diameter Over Cond.	Insul. Thickness	Jacket Thickness	Approx. OD	Copper Weight	Approx. Weight	DC Resistance @ 25°C	AC Resistance @ 90°C	Min Bending Radius	Allowable Ampacity At 60°C *	Allowable Ampacity 75°C *	Allowable Ampacity 90°C *
	AWG	No.	strands	inch	mil	mil	inch	lb/1000ft	lb/1000ft	Ω/1000ft	Ω/1000ft	inch	Amp	Amp	Amp
617347^	9	2	19	0.126	25	45	0.472	77	136	0.825	0.994	1.8	0	0	0
617349^	9	4	19	0.126	25	60	0.581	154	250	0.825	0.994	2.3	0	0	0
617350^	9	8	19	0.126	25	60	0.753	309	451	0.825	0.994	3	0	0	0
606784	8	2	7	0.141	45	60	0.654	102	244	0.653	0.786	2.6	40	50	55
619121	8	2	7	0.141	45	60	0.658	102	224	0.653	0.786	2.6	40	50	55
618426	8	3	7	0.141	45	60	0.695	154	315	0.653	0.786	2.7	40	50	55
661502^	8	4	19	0.141	45	60	0.768	205	377	0.653	0.786	3	32	40	44
620288	8	5	7	0.141	45	80	0.883	257	489	0.653	0.786	3.5	32	40	44
606775	6	2	7	0.177	45	60	0.766	163	326	0.411	0.495	3	55	65	75
606763	6	3	7	0.177	45	60	0.808	245	444	0.411	0.495	3.2	55	65	75
619125	4	2	7	0.225	45	80	0.919	260	487	0.258	0.31	3.6	70	85	95

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

* Ampacities are based on Table 310.15 (B)(16) of the NEC, 2017 Edition. Ampacities of insulated conductors rated up to and including 2000 Volts, based on ambient temperature of 30°C (86°F)
^ 19 strand combination unilay strand conductor per ASTM B787

Revision: 3.0.00C