MV105/HVTC SPEC 46311

Products > Industrial Products > MV105/HVTC > SPEC46311

SPEC 46311

1/C AL 15kV 220 NLEPR 133% SIMpull^® PVC MV-105

Type MV-105 Single Conductor Aluminum, 220 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level, Tape Shield, SIMpull Polyvinyl Chloride (PVC) Jacket, Dual Rated UL/CSA.

Download PDF Download Excel Table

Construction:

Conductor:Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836
Conductor Shield:Semi-conducting cross-linked copolymer; A conductor separator is used for cable size larger than or equal to 500 Kcmil
Insulation:220 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level,
Insulation Shield:Strippable semi-conducting cross-linked copolymer
Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
Overall Jacket:Polyvinyl Chloride (PVC)

Applications and Features:

Southwire’s 15KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial when installed with a grounding conductor in close proximity that conforms to NEC section 311.36 and 250.4(A)(5), and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend. ST1 (low smoke) Rated for sizes 1/0 and larger. PVC jacket is made with SIM technology and has a coefficient of friction COF of 0.2. Cable can be installed in conduit without the aid of lubrication. Rated for 1000 lbs./FT maximum sidewall pressure.

Specifications:

ASTM B801 Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy

ASTM B836 Compact Rounded Stranded Aluminum Conductors

UL 1072 Medium-Voltage Power Cables

UL 1685 FT4-ST1 Vertical-Tray Fire Propagation and Smoke Release Test (1/0 and Larger)

CSA C22.2 No.230 Tray Cables - Rated TC-ER (1/0 AWG and Larger)

CSA C22.2 No. 2556 / UL 2556 Cable Test Methods

CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV

ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable

ICEA S-97-682 Standard for Shielded Utility Cable Rated for 5 - 46kV

IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)

AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV

Made in America: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661

Sample Print Legend:

SOUTHWIRE [SYMBOL - LIGHTING BOLT] #P# (UL/CSA) 1/C [#AWG or #kcmil] AL 220 MILS NL-EPR 15KV 133% INS LEVEL 25% TS MV-105 FOR CT USE SUN. RES. TC-ER(CSA 1/0 LARGER) FOR DIRECT BURIAL FT4 -ST1 YEAR (NESC) [SEQUENTIAL FEET MARKS]

Table 1 – Weights and Measurements

Stock Number	Cond. Size	Diameter Over Conductor	Diameter Over Insulation	Diameter Over Insulation Shield	Jacket Thickness¹	Approx. OD	Approx. Weight	Max Pull Tension	Min Bending Radius	Conduit Size*
	AWG/Kcmil	inch	inch	inch	mil	inch	lb/1000ft	lb	inch	inch
560195	2	0.268	0.746	0.806	80	0.986	493	398	11.8	3
560200	1	0.298	0.777	0.837	80	1.017	528	502	12.2	3
560214	1/0	0.336	0.814	0.874	80	1.054	573	633	12.6	3
560215	2/0	0.376	0.854	0.914	80	1.094	636	798	13.1	3
560217	3/0	0.422	0.901	0.961	80	1.141	690	1006	13.6	3.5
6726190	3/0	0.422	0.901	0.961	80	1.141	694	1006	13.6	3.5
560246	4/0	0.474	0.953	1.013	80	1.193	766	1269	14.3	3.5
560247	250	0.52	1.006	1.066	80	1.246	839	1500	14.9	3.5
560248	350	0.615	1.102	1.162	80	1.342	997	2100	16.1	4
560117	500	0.735	1.244	1.304	80	1.484	1233	3000	17.8	4.5
TBA	600	0.812	1.308	1.368	80	1.548	1398	3600	18.5	4.5
560118	750	0.908	1.416	1.476	80	1.726	1702	4500	20.7	5
560124	1000	1.06	1.568	1.628	110	1.868	2027	6000	22.4	5.5
581832	2000	1.613	2.143	2.203	110	2.443	3416	12000	29.3

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

* Conduit size based on 3 phase 40% fill-factor without ground
1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination
^ Non SIMpull Jacket

Table 2 – Electrical and Engineering Data

Cond. Size	DC Resistance @ 25°C	AC Resistance @ 90°C	Capacitive Reactance @ 60Hz	Inductive Reactance @ 60Hz	Zero Sequence Impedance*	Positive Sequence Impedance*	Shield Short Circuit Current 6 Cycles	Allowable Ampacity In Duct 90/105°C^†	Allowable Ampacity In Air 90/105°C^‡
AWG/Kcmil	Ω/1000ft	Ω/1000ft	MΩ*1000ft	Ω/1000ft	Ω/1000ft	Ω/1000ft	Amp	Amp	Amp
2	0.267	0.336	0.0541	0.0516	0.704 + j0.456	0.336 + j0.051	2311	120/130	150/170
1	0.211	0.266	0.0505	0.0498	0.634 + j0.44	0.266 + j0.048	2398	135/145	175/195
1/0	0.168	0.211	0.047	0.0479	0.579 + j0.423	0.211 + j0.047	2506	155/165	200/225
2/0	0.133	0.167	0.0437	0.0462	0.534 + j0.406	0.167 + j0.045	2621	175/190	235/260
3/0	0.105	0.133	0.0403	0.0444	0.499 + j0.388	0.133 + j0.043	2753	200/215	270/300
3/0	0.105	0.133	0.0403	0.0444	0.499 + j0.388	0.133 + j0.043	2753	200/215	270/300
4/0	0.084	0.105	0.0373	0.0428	0.469 + j0.368	0.105 + j0.041	2902	230/245	310/350
250	0.071	0.09	0.0355	0.0417	0.451 + j0.35	0.091 + j0.04	3057	250/270	345/385
350	0.05	0.065	0.0314	0.0395	0.42 + j0.319	0.066 + j0.038	3330	305/330	430/480
500	0.035	0.046	0.0276	0.0374	0.392 + j0.286	0.047 + j0.036	3674	370/400	535/600
600	0.029	0.039	0.026	0.0364	0.378 + j0.265	0.04 + j0.034	3924	404/436	601/672
750	0.024	0.033	0.024	0.0353	0.363 + j0.244	0.034 + j0.034	4199	455/490	700/780
1000	0.018	0.026	0.0214	0.0345	0.342 + j0.216	0.027 + j0.033	4635	525/565	840/940
2000	0.0087	0.019	0.016	0.031	-0.018 - j0.345	-0.017 - j0.34	6147	805/865	1295/1445

* Calculations are based on three cables triplexed / 5 mil 25 % over lapping copper tape shield Earth resistivity of 100 ohms-meter
† Ampacities are based on TABLE 310.60(C)(78) Detail 1. of the 2020 National Electrical Code (20°C Ambient Earth Temperature, Thermal Resistance ROH of 90)
‡ Ampacities are based on TABLE 310.60(C)(70) of the 2020 National Electrical Code (40°C Ambient Air Temperature)