Name: HVTECK CU 1/C 220NLEPR TS PVC AIA PVC 15kV 133% CSA
Brand: Southwire
Rating: 5 (1 reviews)

Products > Industrial Products > HVTECK > SPEC26302

SPEC 26302

HVTECK CU 1/C 220NLEPR TS PVC AIA PVC 15kV 133% CSA

Single Conductor, 220 Mils No Lead Ethylene Propylene Rubber (NL-EPR), 133% Insulation Level, Tape Shield, Polyvinyl Chloride (PVC) Inner Jacket, Aluminum Interlocked Armour (AIA), Polyvinyl Chloride (PVC) Jacket

Download PDF

Construction:

Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
Conductor Shield:Semi-conducting cross-linked copolymer
Insulation:220 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% insulation level
Insulation Shield:Strippable semi-conducting cross-linked copolymer
Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
Inner Jacket:PVC inner jacket
Armour:Aluminum Interlocked Armour (AIA)
Overall Jacket:Red Polyvinyl Chloride (PVC) Jacket

Applications and Features:

Southwire's 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs /FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.

Specifications:

ASTM B3 Soft or Annealed Copper Wire

ASTM B8 Concentric-Lay-Stranded Copper Conductors

ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire

CSA C22.2 No. 174 Cables in Hazardous Locations

CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods

CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV

CSA C68.3 Shielded & Concentric Neutral Power Cable - 5 to 46 kV

CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating

CSA HL - for Hazardous Locations rating

CSA SUN RES - for Sunlight Resistant rating

ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable

ICEA T-29-520 Flame Test (210,000 BTU/Hr)

IEEE 383 Flame Test (70,000 btu)

IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)

FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)

AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)

Sample Print Legend:

(CSA) SOUTHWIRE (NESC) #P# 1/C [#AWG or #kcmil] CU 220 NLEPR AIA 15kV 133% INS LEVEL 25% TS SUN RES 105°C FT4 HL (-40°C) LTGG RoHS YEAR [SEQUENTIAL METER MARKS]

Table 1 – Weights and Measurements

Stock Number	Cond. Size	Strand	Diameter Over Conductor	Diameter Over Insulation	Insul. Thickness	Diameter Over Insulation Shield	Inner Jacket Thickness	Dia. Over Armour	Overall Jacket Thickness	Approx. OD	Approx. Weight
	AWG/Kcmil	No.	inch	inch	mil	inch	mil	inch	mil	inch	lb/1000ft
TBA	2	7	0.282	0.760	220	0.820	80	1.332	50	1.432	958
TBA	1	19	0.322	0.800	220	0.860	80	1.372	50	1.472	1049
TBA	1/0	19	0.361	0.839	220	0.899	80	1.411	50	1.511	1152
TBA	2/0	19	0.405	0.883	220	0.943	80	1.455	50	1.555	1279
TBA	3/0	19	0.456	0.934	220	0.994	80	1.506	60	1.626	1467
582434^^	4/0	19	0.512	0.990	220	1.050	80	1.424	55	1.534	1582
586051	250	37	0.558	1.044	220	1.124	80	1.620	60	1.740	1880
TBA	350	37	0.661	1.147	220	1.207	80	1.743	60	1.863	2272
576699	500	37	0.789	1.252	220	1.312	80	1.836	60	1.956	2890
582433^^	500	37	0.789	1.275	220	1.335	80	1.839	65	1.971	2846
TBA	750	61	0.968	1.464	220	1.524	110	2.120	60	2.240	4053
586535	1000	61	1.117	1.613	220	1.673	110	2.237	65	2.369	4832
679247	1000	61	1.117	1.613	220	1.673	110	2.237	65	2.369	4835
586714	1250	91	1.250	1.780	220	1.880	110	2.464	75	2.614	6044
674567	1250	91	1.250	1.780	220	1.880	110	2.464	75	2.614	6055

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination
^^ Tinned Conductors

Table 2 – Electrical and Engineering Data

Cond. Size	Min Bending Radius	Max Pull Tension	DC Resistance @ 25°C	AC Resistance @ 90°C	Capacitive Reactance @ 60Hz	Inductive Reactance @ 60Hz	Zero Sequence Impedance*	Positive Sequence Impedance*	Phase Short Circuit Current @ 60Hz	Allowable Ampacity In Air 90°C	Allowable Ampacity Directly Buried 90°C
AWG/Kcmil	inch	lb	Ω/1000ft	Ω/1000ft	MΩ*1000ft	Ω/1000ft	Ω/1000ft	Ω/1000ft	kAmp	Amp	Amp
2	10.0	530	0.162	0.204	0.051	0.059	0.566 + j0.422	0.205 + j0.06	2540	215	221
1	10.3	669	0.128	0.162	0.047	0.057	0.523 + j0.404	0.163 + j0.057	2664	245	247
1/0	10.5	844	0.102	0.128	0.043	0.055	0.489 + j0.387	0.129 + j0.055	2785	278	275
2/0	10.8	1064	0.081	0.102	0.040	0.053	0.461 + j0.369	0.103 + j0.053	2921	317	306
3/0	11.3	1342	0.064	0.081	0.037	0.051	0.437 + j0.35	0.082 + j0.051	3079	357	335
4/0	10.7	1692	0.051	0.065	0.034	0.049	0.418 + j0.331	0.066 + j0.049	3253	404	369
250	12.1	2000	0.043	0.056	0.032	0.048	0.405 + j0.314	0.057 + j0.048	3420	456	412
350	13.0	2800	0.031	0.041	0.028	0.046	0.382 + j0.284	0.042 + j0.046	3739	537	456
500	13.6	4000	0.022	0.030	0.025	0.043	0.36 + j0.252	0.031 + j0.043	4136	616	497
500	13.7	4000	0.022	0.030	0.025	0.043	0.36 + j0.252	0.031 + j0.043	4136	616	497
750	15.6	6000	0.014	0.023	0.021	0.041	0.335 + j0.213	0.024 + j0.041	4721	706	551
1000	16.5	8000	0.011	0.019	0.019	0.039	0.317 + j0.189	0.02 + j0.039	5183	813	596
1000	16.5	8000	0.011	0.019	0.019	0.039	0.317 + j0.189	0.02 + j0.039	5183	813	596
1250	18.2	10000	0.009	0.018	0.017	0.038	0.317 + j0.189	0.02 + j0.039	5608	920	641
1250	18.2	10000	0.009	0.018	0.017	0.038	0.317 + j0.189	0.02 + j0.039	5608	920	641

* Inductive impedance is based on non-ferrous conduit with one diameter spacing.

Table 3 – Weights and Measurements (Metric)

Stock Number	Cond. Size	Strand	Diameter Over Conductor	Diameter Over Insulation	Insul. Thickness	Diameter Over Insulation Shield	Inner Jacket Thickness	Dia. Over Armour	Overall Jacket Thickness	Approx. OD	Approx. Weight
	AWG/Kcmil	No.	mm	mm	mm	mm	mm	mm	mm	mm	kg/km
TBA	2	7	7.16	19.30	5.59	20.83	2.03	33.83	1.27	36.37	1426
TBA	1	19	8.18	20.32	5.59	21.84	2.03	34.85	1.27	37.39	1561
TBA	1/0	19	9.17	21.31	5.59	22.83	2.03	35.84	1.27	38.38	1714
TBA	2/0	19	10.29	22.43	5.59	23.95	2.03	36.96	1.27	39.50	1903
TBA	3/0	19	11.58	23.72	5.59	25.25	2.03	38.25	1.52	41.30	2183
582434^^	4/0	19	13.00	25.15	5.59	26.67	2.03	36.17	1.40	38.96	2354
586051	250	37	14.17	26.52	5.59	28.55	2.03	41.15	1.52	44.20	2798
TBA	350	37	16.79	29.13	5.59	30.66	2.03	44.27	1.52	47.32	3381
576699	500	37	20.04	31.80	5.59	33.32	2.03	46.63	1.52	49.68	4301
582433^^	500	37	20.04	32.39	5.59	33.91	2.03	46.71	1.65	50.06	4235
TBA	750	61	24.59	37.19	5.59	38.71	2.79	53.85	1.52	56.90	6032
586535	1000	61	28.37	40.97	5.59	42.49	2.79	56.82	1.65	60.17	7191
679247	1000	61	28.37	40.97	5.59	42.49	2.79	56.82	1.65	60.17	7195
586714	1250	91	31.75	45.21	5.59	47.75	2.79	62.59	1.91	66.40	8994
674567	1250	91	31.75	45.21	5.59	47.75	2.79	62.59	1.91	66.40	9011

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination
^^ Tinned Conductors

Table 4 – Electrical and Engineering Data (Metric)

Cond. Size	Min Bending Radius	Max Pull Tension	DC Resistance @ 25°C	AC Resistance @ 90°C	Capacitive Reactance @ 60Hz	Inductive Reactance @ 60Hz	Zero Sequence Impedance*	Positive Sequence Impedance*	Phase Short Circuit Current @ 60Hz	Allowable Ampacity In Air 90°C	Allowable Ampacity Directly Buried 90°C
AWG/Kcmil	mm	newton	Ω/km	Ω/km	MΩ*km	Ω/km	Ω/1000ft	Ω/1000ft	kAmp	Amp	Amp
2	254.00	2359	0.5315	0.67	0.0155	0.1936	0.566 + j0.422	0.205 + j0.06	2540	215	221
1	261.62	2977	0.4199	0.53	0.0143	0.1870	0.523 + j0.404	0.163 + j0.057	2664	245	247
1/0	266.70	3756	0.3346	0.42	0.0131	0.1804	0.489 + j0.387	0.129 + j0.055	2785	278	275
2/0	274.32	4735	0.2657	0.33	0.0122	0.1739	0.461 + j0.369	0.103 + j0.053	2921	317	306
3/0	287.02	5972	0.2100	0.27	0.0113	0.1673	0.437 + j0.35	0.082 + j0.051	3079	357	335
4/0	271.78	7529	0.1673	0.21	0.0104	0.1608	0.418 + j0.331	0.066 + j0.049	3253	404	369
250	307.34	8900	0.1411	0.18	0.0098	0.1575	0.405 + j0.314	0.057 + j0.048	3420	456	412
350	330.20	12460	0.1017	0.13	0.0085	0.1509	0.382 + j0.284	0.042 + j0.046	3739	537	456
500	345.44	17800	0.0722	0.10	0.0076	0.1411	0.36 + j0.252	0.031 + j0.043	4136	616	497
500	347.98	17800	0.0722	0.10	0.0076	0.1411	0.36 + j0.252	0.031 + j0.043	4136	616	497
750	396.24	26700	0.0459	0.08	0.0064	0.1345	0.335 + j0.213	0.024 + j0.041	4721	706	551
1000	419.10	35600	0.0361	0.06	0.0058	0.1280	0.317 + j0.189	0.02 + j0.039	5183	813	596
1000	419.10	35600	0.0361	0.06	0.0058	0.1280	0.317 + j0.189	0.02 + j0.039	5183	813	596
1250	462.28	44500	0.0295	0.06	0.0052	0.1247	0.317 + j0.189	0.02 + j0.039	5608	920	641
1250	462.28	44500	0.0295	0.06	0.0052	0.1247	0.317 + j0.189	0.02 + j0.039	5608	920	641

* Inductive impedance is based on non-ferrous conduit with one diameter spacing.

Revision: 1.000.000

Updated On: Aug. 18, 2023, 2:39 p.m. UTC