Name: CU 600/1000V XLPE Insulation ARMOR-X ® PVC Jacket. XHHW-2 VFD Cable
Brand: Southwire
Rating: 5 (1 reviews)

Products > Industrial Products > Power & Control > SPEC45351

SPEC 45351

CU 600/1000V XLPE Insulation ARMOR-X^® PVC Jacket. XHHW-2 VFD Cable

Type MC-HL Power Cable 600Volt Three Conductor Copper, Cross Linked Polyethylene (XLPE) insulation XHHW-2 Continuous Corrugated Welded Armor - ARMOR-X^®, Polyvinyl Chloride (PVC) Jacket with 3 Bare CU Ground

Download PDF Download Excel Table

Construction:

Conductor:Class B compressed stranded bare copper per ASTM B3 and B8
Insulation:Cross Linked Polyethylene (XLPE) Type XHHW-2
Grounding Conductor:Class B compressed stranded bare copper per ASTM B3 and B8
Filler:Paper filler (cable size 8 & 6 uses Polypropylene filler)
Binder:Polypropylene tape
Armor:ARMOR-X^® Continuous Corrugated Welded Armor
Overall Jacket:Polyvinyl Chloride (PVC) Jacket

Applications and Features:

Southwire’s 600 Volt Type MC-HL ARMOR-X^® power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, 250°C for short circuit conditions, and -50°C for cold bend. For uses in Class I, II, and III, Division 1 and 2 hazardous locations per NEC Article 501, 502, and 503. Suitable for VFD application.

Specifications:

ASTM B3 Soft or Annealed Copper Wire

ASTM B8 Concentric-Lay-Stranded Copper Conductors

UL 44 Thermoset-Insulated Wires and Cables

UL 1569 Metal-Clad Cables

UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test

CSA C22.2 No. 123 Metal sheathed cables RA90-HL

ICEA S-58-679 Control Cable Conductor Identification Method 3 (1-BLACK, 2-RED, 3-BLUE)

ICEA S-58-679 Control Cable Conductor Identification Method 4

ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy

IEEE 1202 FT4 Vertical Tray Flame Test (70,000 Btu/hr) and ICEA T-29-520 - (210,000 Btu/hr)

Sample Print Legend:

{SQFTG_DUAL} SOUTHWIRE MASTER-DESIGN ARMOR-X^® {UL} TYPE MC-HL 3/C XXX KCMIL (XXX{mm2}) CU XHHW-2 GW 3 X X AWG 90{D}C JACKET -40{D}C SUN. RES. DIR. BUR. FOR CT USE 600V IEEE1202/FT4 -- {CSA} RA90-HL AG14 XLPE -40{D}C 600V FT4 SR 90{D}C -- {NOM}-ANCE Tipo MC XHHW-2 CT FT4 -- VFD USA

Table 1 – Weights and Measurements

Cond. Size	Cond. Number	Strand Count	Diameter Over Conductor	Insul. Thickness	Diameter Over Insulation	Ground	Diameter Over Armor	Jacket Thickness	Approx. OD	Copper Weight	Approx. Weight
AWG/Kcmil		No. of Strands	inch	mil	inch	No. x AWG	inch	mil	inch	lb/1000ft	lb/1000ft
4/0	3	19	0.512	55	0.608	3 x 8	1.590	60	1.710	2134	2832

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

Table 2 – Electrical and Engineering Data

Cond. Size	Cond. Number	Min Bending Radius	Max Pull Tension	DC Resistance @ 25°C	AC Resistance @ 75°C	Inductive Reactance @ 60Hz	Allowable Ampacity At 60°C	Allowable Ampacity At 75°C	Allowable Ampacity At 90°C
AWG/Kcmil		inch	lb	Ω/1000ft	Ω/1000ft	Ω/1000ft	Amp	Amp	Amp
4/0	3	11.9	5078	0.051	0.062	0.041	195	230	260

* Ampacities based upon 2023 NEC Table 310.16. See NEC sections 310.15 and 110.14(C) for additional requirements.

Revision: 1.000.007

Updated On: Sept. 11, 2023, 8:18 p.m. UTC

CU 600/1000V XLPE Insulation ARMOR-X® PVC Jacket. XHHW-2 VFD Cable