SPEC 26232

HVTECK AL 1/C 140TRXLPE TS PVC AIA PVC 8kV 133% CSA

Single Conductor, 140 Mils Tree Retardant Cross Linked Polyethylene, 133% Insulation Level, Tape Shield, Polyvinyl Chloride (PVC) Inner Jacket, Aluminum Interlocked Armour (AIA), Polyvinyl Chloride (PVC) Jacket

...

Construction:

  1. Conductor:Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836
  2. Conductor Shield:Semi-conducting cross-linked copolymer; A conductor separator is used for cable size larger than or equal to 500 Kcmil
  3. Insulation:140 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level
  4. Insulation Shield:Strippable semi-conducting cross-linked copolymer
  5. Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
  6. Inner Jacket:PVC inner jacket
  7. Armour:Aluminum Interlocked Armour (AIA)
  8. Overall Jacket:Orange Polyvinyl Chloride (PVC) Jacket

Applications and Features:

Southwire's 8kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs /FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.

Specifications:

  • ASTM B801 Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy
  • ASTM B836 Compact Rounded Stranded Aluminum Conductors
  • CSA C22.2 No. 174 Cables in Hazardous Locations
  • CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
  • CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
  • CSA C68.3 Shielded & Concentric Neutral Power Cable - 5 to 46 kV
  • CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
  • CSA HL - for Hazardous Locations rating
  • CSA SUN RES - for Sunlight Resistant rating
  • ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
  • ICEA T-29-520 Flame Test (210,000 BTU/Hr)
  • IEEE 383 Flame Test (70,000 btu)
  • IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)
  • FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)
  • AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
  • Sample Print Legend:

    (CSA) SOUTHWIRE (NESC) #P# 1/C [#AWG or #kcmil] CPT AL 140 TRXLPE AIA 8kV 133% INS LEVEL 25% TS SUN RES 105°C FT4 HL (-40°C) LTGG RoHS YEAR [SEQUENTIAL METER MARKS]
    Table 1 – Weights and Measurements
    Stock NumberCond. SizeStrandDiameter Over ConductorDiameter Over InsulationInsul. ThicknessDiameter Over Insulation ShieldInner Jacket ThicknessDia. Over ArmourOverall Jacket ThicknessApprox. ODApprox. Weight
    AWG/KcmilNo.inchinchmilinchmilinchmilinchlb/1000ft
    TBA270.2680.5861400.646651.018501.118548
    TBA1190.2980.6161400.676651.048501.148585
    TBA1/0190.3360.6541400.714801.116501.216667
    TBA2/0190.3760.6941400.754801.156501.256723
    TBA3/0190.4220.7401400.800801.202501.302789
    TBA4/0190.4740.7921400.852801.364501.464881
    TBA250370.5200.8461400.906801.418501.518960
    TBA350370.6150.9411401.001801.513601.6331159
    672085500340.7351.0841401.144801.656601.7761479
    TBA750610.9081.2441401.304801.840601.9601814
    TBA1000611.0601.3961401.456801.992602.1122271
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    * Strand count meets minimum number per ASTM
    Table 2 – Electrical and Engineering Data
    Cond. SizeMin Bending RadiusMax Pull TensionDC Resistance @ 25°CAC Resistance @ 90°CCapacitive Reactance @ 60HzInductive Reactance @ 60HzZero Sequence ImpedancePositive Sequence ImpedancePhase Short Circuit Current @ 6 CyclesAllowable Ampacity In Air 90°CAllowable Ampacity Directly Buried 90°C
    AWG/KcmilinchlbΩ/1000ftΩ/1000ftMΩ*1000ftΩ/1000ftΩ/1000ftΩ/1000ftAmpAmpAmp
    213.43980.2670.3360.0480.0550.695 + j0.4930.337 + j0.0542032169176
    113.85020.2110.2660.0450.0530.627 + j0.4750.267 + j0.0512125194198
    1/014.66330.1680.2110.0410.0510.573 + j0.4560.212 + j0.0502243222223
    2/015.17980.1330.1670.0380.0490.530 + j0.4360.168 + j0.0482367255250
    3/015.610060.1050.1330.0350.0480.497 + j0.4150.134 + j0.0462509290278
    4/017.612690.0840.1050.0320.0480.467 + j0.3920.106 + j0.0462670329309
    25018.215000.0710.0900.0300.0460.450 + j0.3710.091 + j0.0452838370347
    35019.621000.0500.0650.0260.0440.421 + j0.3360.066 + j0.0433132446402
    50021.330000.0350.0460.0240.0420.393 + j0.2980.047 + j0.0403504533451
    75023.545000.0240.0330.0190.0390.365 + j0.2510.034 + j0.0384071631500
    100025.360000.0180.0260.0160.0380.344 + j0.2190.027 + j0.0364542707539
    * Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.
    * CEC ampacities are based on:
    3-1/C in air copper and aluminum: D17M
    3-1/C direct buried copper and aluminum: D17A
    Table 3 – Weights and Measurements (Metric)
    Stock NumberCond. SizeStrandDiameter Over ConductorDiameter Over InsulationInsul. ThicknessDiameter Over Insulation ShieldInner Jacket ThicknessDia. Over ArmourOverall Jacket ThicknessApprox. ODApprox. Weight
    AWG/KcmilNo.mmmmmmmmmmmmmmmmkg/km
    TBA276.8114.883.5616.411.6525.861.2728.40816
    TBA1197.5715.653.5617.171.6526.621.2729.16871
    TBA1/0198.5316.613.5618.142.0328.351.2730.89993
    TBA2/0199.5517.633.5619.152.0329.361.2731.901076
    TBA3/01910.7218.803.5620.322.0330.531.2733.071174
    TBA4/01912.0420.123.5621.642.0334.651.2737.191311
    TBA2503713.2121.493.5623.012.0336.021.2738.561429
    TBA3503715.6223.903.5625.432.0338.431.5241.481725
    6720855003418.6727.533.5629.062.0342.061.5245.112201
    TBA7506123.0631.603.5633.122.0346.741.5249.782700
    TBA10006126.9235.463.5636.982.0350.601.5253.643380
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    * Strand count meets minimum number per ASTM
    Table 4 – Electrical and Engineering Data (Metric)
    Cond. SizeMin Bending RadiusMax Pull TensionDC Resistance @ 25°CAC Resistance @ 90°CCapacitive Reactance @ 60HzInductive Reactance @ 60HzZero Sequence ImpedancePositive Sequence ImpedancePhase Short Circuit Current @ 6 CyclesAllowable Ampacity In Air 90°CAllowable Ampacity Directly Buried 90°C
    AWG/KcmilmmnewtonΩ/kmΩ/kmMΩ*kmΩ/kmΩ/1000ftΩ/1000ftAmpAmpAmp
    2340.3617710.87601.100.01460.18040.695 + j0.4930.337 + j0.0542032169176
    1350.5222340.69230.870.01370.17390.627 + j0.4750.267 + j0.0512125194198
    1/0370.8428170.55120.690.01250.16730.573 + j0.4560.212 + j0.0502243222223
    2/0383.5435510.43640.550.01160.16080.530 + j0.4360.168 + j0.0482367255250
    3/0396.2444770.34450.440.01070.15750.497 + j0.4150.134 + j0.0462509290278
    4/0447.0456470.27560.340.00980.15750.467 + j0.3920.106 + j0.0462670329309
    250462.2866750.23290.300.00910.15090.450 + j0.3710.091 + j0.0452838370347
    350497.8493450.16400.210.00790.14440.421 + j0.3360.066 + j0.0433132446402
    500541.02133500.11480.150.00730.13780.393 + j0.2980.047 + j0.0403504533451
    750596.90200250.07870.110.00580.12800.365 + j0.2510.034 + j0.0384071631500
    1000642.62267000.05910.090.00490.12470.344 + j0.2190.027 + j0.0364542707539
    * Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.
    * CEC ampacities are based on:
    3-1/C in air copper and aluminum: D17M
    3-1/C direct buried copper and aluminum: D17A

    Revision: 1.000.000

    Updated On: July 12, 2024, 5:43 p.m. UTC