Name: HVTECK AL 1/C 90NLEPR TS PVC AIA PVC 5kV 100% CSA
Brand: Southwire
Rating: 5 (1 reviews)

Products > Industrial > HVTECK > SPEC26121

SPEC 26121

HVTECK AL 1/C 90NLEPR TS PVC AIA PVC 5kV 100% CSA

Single Conductor, 90 Mils No Lead Ethylene Propylene Rubber (NL-EPR), 100% Insulation Level, Tape Shield, Polyvinyl Chloride (PVC) Inner Jacket, Aluminum Interlocked Armour (AIA), Polyvinyl Chloride (PVC) Jacket

Download PDF Download Excel Table

Construction:

Conductor:Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836
Conductor Shield:Semi-conducting cross-linked copolymer; A conductor separator is used for cable size larger than or equal to 500 Kcmil
Insulation:90 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 100% insulation level
Insulation Shield:Strippable semi-conducting cross-linked copolymer
Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
Inner Jacket:PVC inner jacket
Armour:Aluminum Interlocked Armour (AIA)
Overall Jacket:Orange Polyvinyl Chloride (PVC) Jacket

Applications and Features:

Southwire's 5kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs /FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.

Specifications:

ASTM B801 Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy

ASTM B836 Compact Rounded Stranded Aluminum Conductors

CSA C22.2 No. 174 Cables in Hazardous Locations

CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods

CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV

CSA C68.3 Shielded & Concentric Neutral Power Cable - 5 to 46 kV

CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating

CSA HL - for Hazardous Locations rating

CSA SUN RES - for Sunlight Resistant rating

ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable

ICEA T-29-520 Flame Test (210,000 BTU/Hr)

IEEE 383 Flame Test (70,000 btu)

IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)

FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)

AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)

Sample Print Legend:

(CSA) SOUTHWIRE (NESC) #P# 1/C [#AWG or #kcmil] CPT AL 90 NLEPR AIA 5kV 100% INS LEVEL 25% TS SUN RES 105°C FT4 HL (-40°C) LTGG RoHS YEAR [SEQUENTIAL METER MARKS]

Table 1 – Weights and Measurements

Stock Number	Cond. Size	Strand	Diameter Over Conductor	Diameter Over Insulation	Insul. Thickness	Diameter Over Insulation Shield	Inner Jacket Thickness	Dia. Over Armour	Overall Jacket Thickness	Approx. OD	Copper Weight	Approx. Weight	Conduit Size*
	AWG/Kcmil	No.	inch	inch	mil	inch	mil	inch	mil	inch	lb/1000ft	lb/1000ft	inch
TBA	2	7	0.268	0.486	90	0.546	65	0.906	50	1.006	45	515	2.5
TBA	1	19	0.299	0.517	90	0.577	65	0.937	50	1.037	48	554	2.5
TBA	1/0	19	0.336	0.554	90	0.614	65	0.974	50	1.074	51	600	2.5
TBA	2/0	19	0.376	0.594	90	0.654	65	1.014	50	1.114	54	656	3
TBA	3/0	19	0.423	0.641	90	0.701	80	1.091	50	1.191	58	754	3
TBA	4/0	19	0.475	0.693	90	0.753	80	1.143	50	1.243	62	834	3
TBA	250	37	0.52	0.746	90	0.806	80	1.196	50	1.296	66	914	3.5
TBA	350	37	0.616	0.842	90	0.902	80	1.292	50	1.392	74	1081	3.5
TBA	500	37	0.736	0.962	90	1.022	80	1.412	50	1.512	84	1314	4
TBA	750	61	0.908	1.144	90	1.204	80	1.694	60	1.814	99	1884	4.5
585169	750	58	0.908	1.144	90	1.224	80	1.736	60	1.856	101	1777	5
TBA	1000	61	1.117	1.353	90	1.413	80	1.903	60	2.023	116	2302	5.5

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

* Strand count meets minimum number per ASTM
TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

Table 2 – Electrical and Engineering Data

Cond. Size	Min Bending Radius	Max Pull Tension	DC Resistance @ 25°C	AC Resistance @ 90°C	Capacitive Reactance @ 60Hz	Inductive Reactance @ 60Hz	Zero Sequence Impedance	Positive Sequence Impedance	Phase Short Circuit Current @ 6 Cycles	Allowable Ampacity In Air 90°C	Allowable Ampacity Directly Buried 90°C
AWG/Kcmil	inch	lb	Ω/1000ft	Ω/1000ft	MΩ*1000ft	Ω/1000ft	Ω/1000ft	Ω/1000ft	Amp	Amp	Amp
2	7	398	0.266	0.365	0.024	0.052	0.689+j0.572	0.366+j0.057	1723	169	176
1	7.3	502	0.211	0.289	0.022	0.05	0.619+j0.554	0.290+j0.054	1819	194	198
1/0	7.5	633	0.167	0.229	0.02	0.048	0.565+j0.536	0.230+j0.052	1933	222	223
2/0	7.8	798	0.133	0.182	0.019	0.047	0.523+j0.516	0.183+j0.050	2057	255	250
3/0	8.3	1006	0.105	0.144	0.017	0.045	0.489+j0.494	0.145+j0.049	2203	290	278
4/0	8.7	1269	0.084	0.115	0.016	0.044	0.465+j0.470	0.116+j0.048	2364	329	309
250	9.1	1500	0.07	0.096	0.014	0.043	0.449+j0.448	0.097+j0.046	2528	370	347
350	9.7	2100	0.051	0.07	0.013	0.04	0.425+j0.411	0.071+j0.044	2826	446	402
500	10.6	3000	0.036	0.05	0.011	0.038	0.404+j0.368	0.051+j0.042	3198	533	451
750	12.7	4500	0.023	0.033	0.009	0.038	0.378+j0.314	0.034+j0.041	3761	631	500
750	13	4500	0.023	0.033	0.009	0.038	0.377+j0.309	0.034+j0.042	3823	631	500
1000	14.2	6000	0.017	0.025	0.007	0.035	0.357+j0.265	0.027+j0.041	4409	707	539

* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.
* CEC ampacities are based on:
3-1/C in air copper and aluminum: D17M
3-1/C direct buried copper and aluminum: D17A

Table 3 – Weights and Measurements (Metric)

Stock Number	Cond. Size	Strand	Diameter Over Conductor	Diameter Over Insulation	Insul. Thickness	Diameter Over Insulation Shield	Inner Jacket Thickness	Dia. Over Armour	Overall Jacket Thickness	Approx. OD	Copper Weight	Approx. Weight	Conduit Size*
	AWG/Kcmil	No.	mm	mm	mm	mm	mm	mm	mm	mm	kg/km	kg/km	inch
TBA	2	7	6.81	12.34	2.29	13.87	1.65	23.01	1.27	25.55	67	766	2.5
TBA	1	19	7.59	13.13	2.29	14.66	1.65	23.80	1.27	26.34	71	824	2.5
TBA	1/0	19	8.53	14.07	2.29	15.60	1.65	24.74	1.27	27.28	76	893	2.5
TBA	2/0	19	9.55	15.09	2.29	16.61	1.65	25.76	1.27	28.30	80	976	3
TBA	3/0	19	10.74	16.28	2.29	17.81	2.03	27.71	1.27	30.25	86	1122	3
TBA	4/0	19	12.07	17.60	2.29	19.13	2.03	29.03	1.27	31.57	92	1241	3
TBA	250	37	13.21	18.95	2.29	20.47	2.03	30.38	1.27	32.92	98	1360	3.5
TBA	350	37	15.65	21.39	2.29	22.91	2.03	32.82	1.27	35.36	110	1609	3.5
TBA	500	37	18.69	24.43	2.29	25.96	2.03	35.86	1.27	38.40	125	1955	4
TBA	750	61	23.06	29.06	2.29	30.58	2.03	43.03	1.52	46.08	147	2804	4.5
585169	750	58	23.06	29.06	2.29	31.09	2.03	44.09	1.52	47.14	150	2644	5
TBA	1000	61	28.37	34.37	2.29	35.89	2.03	48.34	1.52	51.38	173	3426	5.5

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

* Strand count meets minimum number per ASTM
TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

Table 4 – Electrical and Engineering Data (Metric)

Cond. Size	Min Bending Radius	Max Pull Tension	DC Resistance @ 25°C	AC Resistance @ 90°C	Capacitive Reactance @ 60Hz	Inductive Reactance @ 60Hz	Zero Sequence Impedance	Positive Sequence Impedance	Phase Short Circuit Current @ 6 Cycles	Allowable Ampacity In Air 90°C	Allowable Ampacity Directly Buried 90°C
AWG/Kcmil	mm	newton	Ω/km	Ω/km	MΩ*km	Ω/km	Ω/1000ft	Ω/1000ft	Amp	Amp	Amp
2	177.80	1771	0.8727	1.20	0.0073	0.1706	0.689+j0.572	0.366+j0.057	1723	169	176
1	185.42	2234	0.6923	0.95	0.0067	0.1640	0.619+j0.554	0.290+j0.054	1819	194	198
1/0	190.50	2817	0.5479	0.75	0.0061	0.1575	0.565+j0.536	0.230+j0.052	1933	222	223
2/0	198.12	3551	0.4364	0.60	0.0058	0.1542	0.523+j0.516	0.183+j0.050	2057	255	250
3/0	210.82	4477	0.3445	0.47	0.0052	0.1476	0.489+j0.494	0.145+j0.049	2203	290	278
4/0	220.98	5647	0.2756	0.38	0.0049	0.1444	0.465+j0.470	0.116+j0.048	2364	329	309
250	231.14	6675	0.2297	0.31	0.0043	0.1411	0.449+j0.448	0.097+j0.046	2528	370	347
350	246.38	9345	0.1673	0.23	0.0040	0.1312	0.425+j0.411	0.071+j0.044	2826	446	402
500	269.24	13350	0.1181	0.16	0.0034	0.1247	0.404+j0.368	0.051+j0.042	3198	533	451
750	322.58	20025	0.0755	0.11	0.0027	0.1247	0.378+j0.314	0.034+j0.041	3761	631	500
750	330.20	20025	0.0755	0.11	0.0027	0.1247	0.377+j0.309	0.034+j0.042	3823	631	500
1000	360.68	26700	0.0558	0.08	0.0021	0.1148	0.357+j0.265	0.027+j0.041	4409	707	539

Revision: 1.000.000

Updated On: Dec. 31, 2024, 11:07 p.m. UTC