Name: Southwire’s Patent Pending Re 3TM Minimum Bending Radius Device For SIM pull THHN/THWN-2 ® Cables
Brand: Southwire
Rating: 5 (1 reviews)

Products > Infrastructure Products > Building Wire > SPEC10915

SPEC 10915

Southwire’s Patent Pending Re^3TM Minimum Bending Radius Device For SIMpull THHN/THWN-2^® Cables

The Re^3TM Minimum Bending Radius (MBR) Device is uniquely designed by CableTechSupport^TM Services Engineers to simplify installation and prevent overbending.

Download PDF

Construction:

There is no need to Calculate the Minimum Bending Radius (MBR) or Search for a Value on the Spec Sheet!

This adjustable device can be used on a wide range of cable sizes

The specific cable size is marked on the device to make installation easier

Overbending prevention with patent pending ring to guide installation

A durable design allows for repeated use

Contact SW Speed to place an order
Contact Cable Tech Support for engineering support.

Revision: 1.000.011

Updated On: Dec. 31, 2024, 11:06 p.m. UTC

Southwire’s Patent Pending Re3TM Minimum Bending Radius Device For SIMpull THHN/THWN-2® Cables

The Re3TM Minimum Bending Radius (MBR) Device is uniquely designed by CableTechSupportTM Services Engineers to simplify installation and prevent overbending.

Construction:

Southwire’s Patent Pending Re^3TM Minimum Bending Radius Device For SIMpull THHN/THWN-2^® Cables

The Re^3TM Minimum Bending Radius (MBR) Device is uniquely designed by CableTechSupport^TM Services Engineers to simplify installation and prevent overbending.