SPEC 26441

HVTECK CU 3/C 260NLEPR TS PVC AIA PVC 25kV 100% CSA

3 Conductor, 260 Mils No Lead Ethylene Propylene Rubber (NL-EPR), 100% Insulation Level, Tape Shield, Polyvinyl Chloride (PVC) Inner Jacket, Aluminum Interlocked Armour (AIA), Polyvinyl Chloride (PVC) Jacket

...

Construction:

  1. Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
  2. Conductor Shield:Semi-conducting cross-linked copolymer
  3. Insulation:260 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 100% insulation level
  4. Insulation Shield:Strippable semi-conducting cross-linked copolymer
  5. Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
  6. Filler:Interstices filled with non-hydroscoping/non-wicking fillers
  7. Grounding Conductor:Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8
  8. Binder:Polypropylene tape
  9. Inner Jacket:PVC inner jacket
  10. Armour:Aluminum Interlocked Armour (AIA)
  11. Overall Jacket:Black Polyvinyl Chloride (PVC) Jacket

Applications and Features:

Southwire's 25kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs /FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.

Specifications:

  • ASTM B3 Soft or Annealed Copper Wire
  • ASTM B8 Concentric-Lay-Stranded Copper Conductors
  • CSA C22.2 No. 174 Cables in Hazardous Locations
  • CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
  • CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
  • CSA C68.3 Shielded & Concentric Neutral Power Cable - 5 to 46 kV
  • CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
  • CSA HL - for Hazardous Locations rating
  • CSA SUN RES - for Sunlight Resistant rating
  • ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
  • ICEA T-29-520 Flame Test (210,000 BTU/Hr)
  • IEEE 383 Flame Test (70,000 btu)
  • IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
  • FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)
  • AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
  • Sample Print Legend:

    (CSA) SOUTHWIRE (NESC) #P# 3/C [#AWG or #kcmil] CU 260 NLEPR AIA 25kV 100% INS LEVEL 25% TS SUN RES 105°C FT4 HL (-40°C) LTGG RoHS YEAR [SEQUENTIAL METER MARKS]
    Table 1 – Weights and Measurements
    Stock NumberCond. SizeStrandDiameter Over ConductorDiameter Over InsulationInsul. ThicknessDiameter Over Insulation ShieldGround SizeInner Jacket ThicknessDia. Over ArmourOverall Jacket ThicknessApprox. ODCopper WeightApprox. Weight
    AWG/KcmilNo.inchinchmilinchAWGmilinchmilinchlb/1000ftlb/1000ft
    TBA1190.3220.8802600.94061102.650752.8009203545
    TBA1/0190.3610.9192600.97961102.734752.88411263878
    TBA2/0190.4050.9632601.02361102.829752.97913864286
    TBA3/0190.4561.0142601.07441102.939753.08917624832
    TBA4/0190.5121.0702601.13041103.060853.23021735496
    TBA250370.5581.1242601.18441253.207853.37725366150
    647159350370.6611.2072601.26731253.400853.57037447610
    TBA500370.7891.3552601.41531253.706853.87649219367
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination
    Table 2 – Electrical and Engineering Data
    Cond. SizeMin Bending RadiusMax Pull TensionDC Resistance @ 25°CAC Resistance @ 90°CCapacitive Reactance @ 60HzInductive Reactance @ 60HzZero Sequence ImpedancePositive Sequence ImpedancePhase Short Circuit Current @ 6 CyclesAllowable Ampacity In Air 90°CAllowable Ampacity Directly Buried 90°C
    AWG/KcmilinchlbΩ/1000ftΩ/1000ftMΩ*1000ftΩ/1000ftΩ/1000ftΩ/1000ftAmpAmpAmp
    119.620080.1280.1620.0490.0470.531 + j0.3730.162 + j0.0472943202226
    1/020.225340.1020.1280.0450.0450.495 + j0.3580.128 + j0.0453064231256
    2/020.931940.0810.1020.0420.0430.466 + j0.3410.102 + j0.0443200265290
    3/021.640270.0640.0810.0390.0420.440 + j0.3240.081 + j0.0423358303327
    4/022.650780.0510.0650.0360.0400.420 + j0.3050.065 + j0.0413532348369
    25023.660000.0430.0560.0300.0390.406 + j0.290.056 + j0.0393699384408
    35025.084000.0310.0410.0290.0370.381 + j0.2620.041 + j0.0374018468485
    50027.1120000.0200.0300.0300.0350.357 + j0.2330.031 + j0.0364415565571
    * Inductive impedance is based on non-ferrous conduit with one diameter spacing.
    Table 3 – Weights and Measurements (Metric)
    Stock NumberCond. SizeStrandDiameter Over ConductorDiameter Over InsulationInsul. ThicknessDiameter Over Insulation ShieldGround SizeInner Jacket ThicknessDia. Over ArmourOverall Jacket ThicknessApprox. ODCopper WeightApprox. Weight
    AWG/KcmilNo.mmmmmmmmAWGmmmmmmmmkg/kmkg/km
    TBA1198.1822.356.6023.8862.7967.311.9171.1213695276
    TBA1/0199.1723.346.6024.8762.7969.441.9173.2516765771
    TBA2/01910.2924.466.6025.9862.7971.861.9175.6720636378
    TBA3/01911.5825.766.6027.2842.7974.651.9178.4626227191
    TBA4/01913.0027.186.6028.7042.7977.722.1682.0432348179
    TBA2503714.1728.556.6030.0743.1881.462.1685.7837749152
    6471593503716.7930.666.6032.1833.1886.362.1690.68557211325
    TBA5003720.0434.426.6035.9433.1894.132.1698.45732313940
    All dimensions are nominal and subject to normal manufacturing tolerances
    ◊ Cable marked with this symbol is a standard stock item
    1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination
    Table 4 – Electrical and Engineering Data (Metric)
    Cond. SizeMin Bending RadiusMax Pull TensionDC Resistance @ 25°CAC Resistance @ 90°CCapacitive Reactance @ 60HzInductive Reactance @ 60HzZero Sequence ImpedancePositive Sequence ImpedancePhase Short Circuit Current @ 6 CyclesAllowable Ampacity In Air 90°CAllowable Ampacity Directly Buried 90°C
    AWG/KcmilmmnewtonΩ/kmΩ/kmMΩ*kmΩ/kmΩ/1000ftΩ/1000ftAmpAmpAmp
    1497.8489360.41990.530.01490.15420.531 + j0.3730.162 + j0.0472943202226
    1/0513.08112760.33460.420.01370.14760.495 + j0.3580.128 + j0.0453064231256
    2/0530.86142130.26570.330.01280.14110.466 + j0.3410.102 + j0.0443200265290
    3/0548.64179200.21000.270.01190.13780.440 + j0.3240.081 + j0.0423358303327
    4/0574.04225970.16730.210.01100.13120.420 + j0.3050.065 + j0.0413532348369
    250599.44267000.14110.180.00910.12800.406 + j0.290.056 + j0.0393699384408
    350635.00373800.10170.130.00880.12140.381 + j0.2620.041 + j0.0374018468485
    500688.34534000.06560.100.00910.11480.357 + j0.2330.031 + j0.0364415565571
    * Inductive impedance is based on non-ferrous conduit with one diameter spacing.

    Revision: 1.000.000

    Updated On: Dec. 11, 2023, 9:29 p.m. UTC