Name: HALO-FLEX™ CU 600 XLPE Insulation Thermoplastic CPE-TP Jacket. XHHW-2 TC-ER-HL
Brand: Southwire
Rating: 5 (1 reviews)

Products > Industrial Products > Power & Control / Buy America(n) Compliant > SPEC45061

SPEC 45061

HALO-FLEX™ CU 600 XLPE Insulation Thermoplastic CPE-TP Jacket. XHHW-2 TC-ER-HL

Halo-Flex™ Type TC-ER-HL Control Cable 600 or 1000 Volt Copper Conductors, Fire Retardant Cross Linked Polyethylene (FR-XLPE) Insulation XHHW-2 -40°C Thermoplastic CPE-TP Jacket, Control Cable Conductor Identification Method 1 Table 2

Download PDF

Construction:

Conductor:Flexible Stranded Rope-Lay Class K Copper per ASTM B174
Insulation:Fire Retardant Cross Linked Polyethylene (FR-XLPE) Type XHHW-2
Ground:Green insulated ground same size as phase conductor
Filler:Polypropylene filler as needed to fill interstices
Separator:Mylar for ease of stripability. Optional metal shield
Rip Cord:Rip cord for quick removal of extruded polymeric layer and jacket
Extruded Polymeric Layer:Extruded Polymeric Barrier Layer
Overall Jacket:Low-Friction SIM Technology® -40°C Thermoplastic Chlorinated Polyethylene (CPE-TP) Jacket

Applications and Features:

Southwire’s Halo-Flex™ 600V TC-ER-HL or 1000V TC-ER power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. A gas/vapor-tight polymeric sheath is extruded over the core. Rated for use in Class I, II, or III, Division 1 & 2, Zone 1 & 2, hazardous locations per NEC Article 501, 502, and 503. Listed for exposed runs in hazardous locations (TC-ER-HL) per NEC 336.10. - 40°C cold bend and cold impact. HALO-FLEX ™ CPE jacket is made with patented SIM Technology. Cable can be installed in conduit without the aid of lubrication. PATENT www.patentsw.com

Specifications:

ASTM B3 Standard Specification for Soft or Annealed Copper Wire

ASTM B8 Concentric-Lay-Stranded Copper Conductors

ASTM B174 Standard Specification for Bunch-Stranded Copper

UL 44 Thermoset-Insulated Wires and Cables

UL 1277 Electrical Power and Control Tray Cables

UL 1309 Marine Shipboard Cable (Optional)

UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test

UL 2225 Cables and Cable-Fittings For Use In Hazardous (Classified) Locations

ICEA S-58-679 Control Cable Conductor Identification Method 3 (1-BLACK, 2-RED, 3-BLUE)

ICEA S-58-679 Control Cable Conductor Identification Method 1 Table 2

ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy

IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test

RoHS-3 Complies with European Directive 2015/863

ABS American Bureau of Shipping Approved

MSHA Mine Safety Health Administration Approved

Sample Print Legend:

(SEQ FOOTAGE) SOUTHWIRE{R} HALO-FLEX{TM} E75755 (Plant Code) {UL} XX AWG CU XX/C XHHW-2 CDRS. GW 1 X XX AWG FR-XLPE/CPE 90°C 600V TYPE TC-ER-HL OR 1000V TYPE TC-ER SUN. RES. FOR DIRECT BURIAL FT4 -40°C OIL RES I/II ABS. RoHS-3 2015/863 COMPLIANT {YYYY} 07-KA180012-MSHA

Table 1 – Physical and Electrical Data

Stock Number	Cond. Size	Cond. Number	Cond. Strands	Diameter Over Cond.	Insul. Thickness	Ground	Jacket Thickness	Approx. OD	Copper Weight	Approx. Weight	DC Resistance @ 25°C	AC Resistance @ 90°C	Min Bending Radius	Allowable Ampacity At 60°C *	Allowable Ampacity 75°C *	Allowable Ampacity 90°C *
	AWG	No.	strands	inch	mil	No. x AWG	mil	inch	lb/1000ft	lb/1000ft	Ω/1000ft	Ω/1000ft	inch	Amp	Amp	Amp
14 AWG
679785	14	5	41	0.073	30	1 x 14	60	0.647	76	246	2.814	3.391	2.5	12	16	20
679789	14	6	41	0.073	30	1 x 14	60	0.647	89	257	2.814	3.391	2.5	12	16	20
679792	14	7	41	0.073	30	1 x 14	60	0.688	102	285	2.814	3.391	2.7	10	14	17
678159	14	8	41	0.073	30	1 x 14	60	0.728	115	311	2.814	3.391	2.9	10	14	17
12 AWG
679804	12	5	65	0.094	30	1 x 12	60	0.710	121	312	1.774	2.137	2.8	16	20	24
679807	12	6	65	0.094	30	1 x 12	60	0.710	141	332	1.774	2.137	2.8	16	20	24
679810	12	7	65	0.094	30	1 x 12	60	0.757	162	371	1.774	2.137	3.0	14	17	21
678162	12	8	65	0.094	30	1 x 12	60	0.803	182	407	1.774	2.137	3.2	14	17	21
10 AWG
679841	10	5	105	0.117	30	1 x 10	60	0.779	194	405	1.111	1.339	3.1	24	28	32
679844	10	6	105	0.117	30	1 x 10	60	0.779	226	442	1.111	1.339	3.1	24	28	32
679848	10	7	105	0.117	30	1 x 10	80	0.873	258	530	1.111	1.339	3.4	21	24	28
678165	10	8	105	0.117	30	1 x 10	80	0.927	291	583	1.111	1.339	3.7	21	24	28

All dimensions are nominal and subject to normal manufacturing tolerances

◊ Cable marked with this symbol is a standard stock item

† Ampacities are based on Table 310.16 of the NEC, 2020 Edition. Ampacities of insulated conductors rated up to and including 2000 Volts, based on ambient temperature of 30°C (86°F)

Revision: 3.0.00M